Alloy Steel ASTM A193 B7M Fasteners, Gr.B7M AS Bolts Supplier

Grade B7M Hex Bolt, Ready Stock Of Alloy Steel A193 B7M Allen Cap Bolt, Manufacturer of B7M Threaded Rod, Alloy Steel ASTM A193 B7M High Temperature Fasteners, AS B7M Socket Head Cap Screw Supplier in Mumbai.

Unifit Metal Alloys is a well-known supplier of ASTM A193 Grade B7M Bolts, which has a significant impact on the physical and molecular properties.

At relatively elevated temperatures, this Alloy Steel ASME SA193 Grade B7 MU-Bolts maintains its strength well, has excellent cold and hot working properties, and is readily wieldable. The impedance of these products rose in the high frequency area in the presence of 1 pap sulphide, and the frequency dependence of the phase angle revealed two time constants. When this alloy was first presented, it demonstrated corrosion protection comparable to copper, as well as greater overall strength and fatigue strength. Ferrules, plumbing fittings, power steering tubes, and salt water pipeline systems all use it. It provides the necessary resilience to saltwater rust, erosion, impingement, and bacterial fouling.

A193 B7M Socket Head Cap Screws, ASTM A193 B7M Fasteners, AS GR B7M Stud Bolts, Alloy Steel ASTM A193 B7M Bolts, Alloy Steel ASTM A193 B7M Bolts, A193 B7MM Heavy Hex Head Bolts, ASTM A193 Grade B7M Hex Bolts Manufacturer In Mumbai, India.

ASTM A193 Alloy Steel Grade B7 MT-Bolts are found in industries that makes heat exchangers, oil coolers, radiators, high-capacity power plants, and other applications. They are also used in ship construction and repair, condensers, offshore oil platforms, distiller tubes, evaporators, ferrules, and other applications. Because the copper nickel binary system is completely solid soluble, it only has one phase. They are frequently employed in pressure vessels, condensers, and heat exchangers. They are also frequently used for boat hulls, salt water pipe fittings, tube sheet for salt water service, salt water piping systems, and other applications.

ASME SA 193 Alloy Steel Grade B7M Hex Bolts are also used in industries that makes Hot Water Containers, Salt Water Piling Blankets, Salt Water Baffles, Ship Hulls, Propeller Sleeves, Water Hoses, and other similar applications. Although the characteristics of this steel differ depending on composition, some properties of copper nickel alloys are described below. They are used in heat exchangers and condensers, which are essential in all commercial areas. It has excellent formability, which makes flaring and bending easier, even though the metal cost is higher than that of steel options. They are very appealing due to their increased longevity, ease of installation, and safety/reliability qualities. It is designated for bolting, fasteners, valves, and props in both marine and offshore uses.

Get a best quote for Alloy Steel ASTM A193 B7M Bolts, We Keep Bulk Stock of ASTM A193 B7M Fasteners at our stockyard, contact us to request a quote.

ASTM A193 GR.B7M Bolts Specifications

Dimensions	ASME B18.2.1, B18.3
Melt Origin	South America/East Europe/JapanKorea/
Product Origin	Made in India
Threads Configuration	ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads
Certification	Dual Certified As per ASTM & ASME Codes
Additional Certifications	PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Mandatory Requirements	Free from Mercury & Radioactive Contamination
Additional Requirements	NACE MR0103 / MR0175 / ISO 15156 Compliance

ASTM A193 GR.B7M Bolts Chemical Composition

Element	Alloy Steel
	Chromium Molybdenum Steel^A
	Composition^B, %
Carbon	0.37 - 0.49^C
Manganese	0.65 - 1.10
Phosphorus	0.035 max
Sulfur	0.040 max
Silicon	0.15 - 0.35
Chromium	0.75 - 1.20
Molybdenum	0.15 - 0.25

ASTM A193 GR.B7M Bolts Mechanical Properties

Diameter, inch.	Tensile Strength, min, ksi	Yield Strength, min, 0.2% offset, ksi	Elongation in 4D, min, %	Reduction of Area, min, %	Hardness, max
					Hardness, max	4 and under	100	80	18	50	235 HBW or 99 HRB
					over 4 to 7, inclusive	100	75	18	50	235 HBW or 99 HRB

ASTM A193 GR.B7M Bolts Standard

Hexagon Bolt / Set Screws	Stud Bolt	Hexagon Nuts	Socket Cap screws
DIN 931	BS4882	DIN 934	DIN 912
DIN 933	DIN 976	BS 1768	DIN 6912
BS 1768		BS 1769	DIN 7984
UNI 5731		BS 1083	ANSI B18.3
UNI 5739		BS 3692	ISO 4762
ISO 4014		ISO 4032	UNI 5931
ISO 4017		ISO 4033	BS 2470
BS 1769		ANSI B18.2.2	BS 4168
BS 3692
ANSI B18.2.1

Socket & Slotted Set Screws	Socket & Slotted Countersunk Screws	Studs	Washers
DIN 913	DIN 963	DIN 938	DIN 125
DIN 914	DIN 7991	DIN 939	DIN 9021

Various Types Of ASTM A193 GR.B7M Bolts

ASTM A193 B7M Bolts

ASTM A193 B7M Square Bolt Alloy Steel ASTM A193 B7M Structural Bolts Alloy Steel ASTM A193 B7M Carriage Bolt A193 B7M Flange Bolts ASTM A193 B7M Anchor Bolts Alloy Steel ASTM A193 B7M J Bolts AS B7M U Bolts ASTM A193 Grade B7M Bolts

ASTM A193 B7M Screws

ASTM A193 B7M Wood Screw Alloy Steel ASTM A193 B7M Self Drilling Screw Alloy Steel ASTM A193 B7M Hex Head Screws Gr.B7M AS Socket Set Screw Grade B7M Wing Screw Alloy Steel ASTM A193 B7M Eye Screw AS B7M Socket Head Cap Screws

ASTM A193 B7M Stud Bolts

AS ASTM A193 B7M Stud Gr.B7M AS Double Ended Studs AS ASTM A193 B7M Tie Rods ASTM A193 Grade B7M Stud Bolts Alloy Steel ASTM A193 B7M Single End Stud Bolts ASTM A193 B7M Threaded Rod Alloy Steel ASTM A193 B7M Fully Threaded Studs

ASTM A193 B7M Hex Bolts

Alloy Steel ASTM A193 B7M Heavy Hex Bolts Alloy Steel ASTM A193 B7M Hex Machine Bolt AS ASTM A193 B7M Hex Head Bolts ASTM A193 Grade B7M Hex Bolts A193 B7M Hexagon Bolt AS B7M Hex Flange Bolt

Weight Chart Of ASTM A193 GR.B7M Bolts

MM THREADS AS PER IS 1363/67
APPROXIMATE WEIGHT IN KGS FOR 100 NOS
LENGTH	DIAMETER
LENGTH	M 5	M 6	M 8	M 10	M 12	M 14	M 16	M 18	M 20	M 22
16 mm	0.448	0.743	1.590	3.211
20 mm	0.598	0.812	1.711	3.411	4.892
25 mm	0.660	0.897	1.871	3.660	5.252	8.170
30 mm	0.737	1.010	2.070	3.912	5.574	9.690	10.707		18.657
35 mm	0.804	1.120	2.271	4.223	5.974	10.000	11.416	16.026	19.608
40 mm	0.881	1.230	2.470	4.533	6.410	10.288	12.107	16.667	20.747
45 mm	0.958	1.340	2.671	4.840	6.859	10.504	12.821	17.241	21.739
50 mm	1.030	1.450	2.870	5.155	7.299	11.261	13.624	17.857	22.727	28.409
55 mm		1.560	3.071	5.464	7.740	11.628	14.409	18.868	23.810	30.120
60 mm		1.670	3.270	5.774	8.183	12.255	15.244	20.000	25.126	32.051
65 mm		1.781	3.472	6.083	8.621	12.626	16.026	21.008	26.455	34.014
70 mm		1.890	3.671	6.394	9.058	12.987	16.835	22.124	27.778	35.461
75 mm		2.000	3.873	6.702	9.506	13.228	17.606	23.256	29.070	39.063
80 mm		2.111	4.072	7.013	10.000	13.889	18.248	24.510	30.303	40.000
90 mm			4.472	7.634	10.917	14.925	19.841	26.042	33.113	41.667
100 mm			4.873	8.251	11.820	16.340	21.459	27.778	35.714	46.296
110 mm				8.881	12.723	17.730	23.041	31.250	38.168	47.170
120 mm				9.506	13.624	18.797	24.631	32.895	40.984	50.000
130 mm				10.101	14.535	20.000	26.316	34.722	43.478	52.632
140 mm				10.707	15.432	20.833	27.933	35.461	46.296	55.556
150 mm				11.312	16.340	22.222	29.412	37.594	48.544	58.824
160 mm				11.905	17.241	24.272	31.056	40.984	50.505	61.728
170 mm				12.500	18.116		32.680		53.191	64.935
180 mm				13.123	19.011	26.882	34.247		55.556	67.568
190 mm				13.736	19.920		35.971		58.140	70.423
200 mm				14.327	20.833	29.586	37.594	49.020	60.976	73.529
220 mm				15.528	22.624		40.650		65.789	79.365
240 mm				16.722	24.510		43.860		71.429	84.746
250 mm				17.301	25.381		45.455		74.627	87.719
260 mm				17.921	26.316		47.170		76.923	90.909
280 mm				19.157	28.090		50.505		81.967	98.039
300 mm				20.325	29.940		53.763		87.719	104.167
320 mm					31.646		56.818		92.593
340 mm					33.557		60.241		98.039
360 mm					35.211		63.291		104.167
380 mm					37.037		66.667		108.696
400 mm					39.063		69.444		113.636

Dimensions Of ASTM A193 B7M Bolts

All measurements in millimeters
NOMINAL SIZE (D)	BODY DIAMETER		HEAD THICKNEASTM A193		ACROASTM A193 THE FLATS		ACROASTM A193 CORNERS
	D (MAX)	D (MIN)	H (MAX)	H (MIN)	F (MAX)	F (MIN)	C (MAX)	C (MIN)
m10	10.00	9.78	6.63	6.17	17.00	15.73	18.48	17.77
m12	12.00	11.73	7.76	4.24	19.00	17.73	20.78	20.03
m14	14.00	13.73	9.09	8.51	22.00	20.67	24.25	23.35
m16	16.00	15.73	10.32	9.68	24.00	23.67	27.71	26.75
m20	20.00	19.67	12.88	12.12	30.00	29.16	34.64	32.95
m24	24.00	23.67	15.44	14.56	36.00	35.00	41.57	39.55
m30	30.00	29.67	19.48	17.92	46.00	45.00	53.12	50.85
m36	36.00	35.61	23.38	21.63	55.00	53.80	63.51	60.79
m42	42.00	41.38	26.97	25.03	65.00	62.90	75.06	71.71
m48	48.00	47.38	31.07	28.93	75.00	72.60	86.60	82.76
m56	56.00	55.26	36.2	33.80	85.00	82.20	98.15	93.71
m64	64.00	63.26	41.32	38.68	95.00	91.80	109.70	104.65
m72	72.00	71.26	46.45	43.55	105.00	101.40	121.24	115.60
m80	80.00	79.26	51.58	48.42	115.00	111.00	132.72	126.54
m90	90.00	89.13	57.74	54.26	130.00	125.50	150.11	143.07
m100	90.00	99.13	63.9	60.10	145.00	140.00	167.43	159.60

You need our support, to have any projects?

Get Free Quotes Contact Us

Ready Stock of ASTM A193 GR.B7M Bolts

Alloy Steel ASTM A193 B7M Anchor Bolt
AS ASTM A193 GRADE B7M Structural Bolts
ASTM A193 B7M Stove Bolts
Alloy Steel ASTM A193 Gr. B7M Bolts
AS ASTM A193 GR B7M Mushroom Head Square Neck Bolts
Alloy Steel ASTM A193 GR B7M Shoulder Bolt
A193 B7M Anchor Bolts
AS ASTM A193 Gr. B7M Stud Bolts
AS ASTM A193 B7M Carriage Bolts
ASTM A193 B7M Eye Bolts
ASTM A193 B7M Full Threaded Bolt
Alloy Steel A193 B7M Half Threaded Stud Bolt
Alloy Steel A193 Grade B7M Hex Head Bolts
ASTM A193 B7M Stud Bolts
Gr.B7M AS bolt
Grade B7M Elevator Bolt Stockist

Alloy Steel ASTM A193 B7M Half Threaded Stud Bolt
AS GR B7M Eye Bolts
Alloy Steel ASTM A193 GR B7M Structural Bolts
ASTM A193 Gr.B7M bolt
AS ASTM A193 Grade B7M Bolts
AS GR B7M Anchor Bolts
Alloy Steel A193 B7M Stove Bolts
ASTM A193 B7M Stud Bolts
ASTM A193 B7M Shoulder Bolt
Alloy Steel ASTM A193 Gr. B7M Stud Bolts
Alloy Steel ASTM A193 B7M Carriage Bolts
ASTM A193 B7M Full Threaded Bolt
AS A193 Grade B7M Hex Head Bolts
Alloy Steel ASTM A193 GR B7M Mushroom Head Square Neck Bolts
AS ASTM A193 B7M Anchor Bolt
AS ASTM A193 Gr B7M Elevator Bolt Stockist

ASTM A193 GR.B7M Bolts Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%