Duplex Grade S31803 Seamless Tubes, Ready Stock Of DSS S32205 Tubing, Duplex 2205 Pipes, Manufacturer of ASTM A790 DuplexSteel S31803 Welded Tube, Duplex Stainless Steel S32205 Pipes & Tubes Supplier in Mumbai.
Unifit Metal Alloys is a renowned manufacturer and trader of Duplex Steel S31803 / S32205 Pipes & Tubes, which can only be toughened by cold working, not by thermal treatment.
The annealed state of this Duplex Steel S31803 Seamless Pipes is slightly less immune to general corrosion in highly oxidising environments than the unannealed condition in most environments. Because of its high corrosion protection, it is frequently used in high stress, high corrosion environments where exposure is intense. Duplex Steel S32205 Welded Pipes are used in high-temperature gaskets, expansion joints, exhaust pipes, and rocket engine components. They are thus suggested for welding components that cannot be annealed later or for parts that must function in operation between 800 and 1600 °F. It is typically used in harsh corrosive environments, such as aviation exhaust stacks, pipes, and ring collectors.
DSS S31803 Butt Weld Fittings, Duplex 2205 90 Square Pipe, ANSI B16.9 Duplex Steel S31803 Heat Ex-changer Tubes, S32205 Duplex Steel Electropolish Pipe, UNS S31803 Seamless Pipes, Duplex Grade S32205 Bush Hex Pipe, DIN 1.4462 Welded Pipes, High Quality S32205 Duplex Steel ERW Pipes Manufacturer In Mumbai, India.
Duplex Alloy 2205 EFW Pipes is also used in oil refineries, fluid catalytic cracking units (FCC), firearms manufacturing, hanger shafts, recuperator tube sheets, shells, and supports, among other things. This process will result in maximum ductility, while this steel has a superb stabilising anneal under corrosion for maximum corrosion protection. Duplex Steel S31803 ERW Tubes is ideal for watery and other low-temperature settings. It is readily welded and processed using normal shop manufacturing techniques. They are thus suggested for welding parts that cannot be annealed later, or for parts that must function in operation between 800 and 1600 °F.
Duplex Steel S32205 Electropolish Tubes is commonly used in places where corrosive conditions are extreme, such as aeroplane exhaust stacks, manifolds, and ring collectors. It is also used in oil refineries, fluid catalytic cracking units (FCC), firearms manufacturing, hanger shafts, recuperator tube sheets, shells, and supports, among other things. Duplex Alloy 2205 Heat Exchanger Tubes is offered in different forms and is also used in uses that do not require a smooth ornamental finish. This process will result in maximum ductility, while for maximum corrosion protection, this steel has superb stabilising anneal under corrosion. As a result, this steel is preferred for watery and other low temperature settings.
Get a best quote for DSS S31803 Pipes & Tubes, We Keep Bulk Stock of Duplex Steel S32205 Seamless Bare Pipe at our stockyard, contact us to request a quote.
Duplex Steel S31803 / S32205 Pipes & Tubes Specifications
| S31803/S32205 Pipes & Tubes Specifications | ASTM A790, A789 / ASME SA790, SA789 |
|---|---|
| Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| ASTM A790 S31803/S32205 Seamless Pipes & Tubes Size | 1 / 2" NB - 16" NB |
| ASTM A790 S31803/S32205 Welded Pipes & Tubes Size | 1 / 2" NB - 24" NB |
| ASTM A790 S31803/S32205 EFW Pipes & Tubes Size | 6" NB - 24" NB |
| Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| Duplex Steel S31803/S32205 Pipes & Tubes Manufacturing Shapes | Hydraulic, Round, Rectangle, Square, Hex, Honed |
| Duplex Steel S31803/S32205 Pipes & Tubes Manufacturing Techniques | Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded |
| Duplex Steel S31803/S32205 Pipes & Tubes Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Duplex Steel S31803/S32205 Pipes & Tubes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Delivery Condition of Duplex Steel S31803/S32205 Pipes & Tubes | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
| Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
| Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM A790 S31803/S32205 12" NB SCH 40S SEAMLESS HEAT NO. XXXX |
| Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Duplex Steel Pipes, Finish as per customer Requirements |
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Packing of Duplex Steel S31803/S32205 Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Specials | Sizes and Specifications other than above can be on request |
