Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Titanium Gr.2 Flanges

  • Home
  • Titanium Flanges

Titanium Gr.2 SORF Flanges, Ready Stock Of Ti Alloy Gr 2 Flanges, Ti Alloy Gr 2 Threaded Flanges, Manufacturer of ASTM A182 Titanium Gr 2 Lap Joint Flanges, Ti Grade 2 Long Weld Neck Flanges Supplier in Mumbai.

Unifit Metal Alloys is a renowned manufacturer and supplier of Titanium Grade 2 Flanges, whichis resistant to corrosion and has a low electrical resistivity. Titanium UNS R50400 Slip On Flanges is less likely to generate continuous networks of chromium carbides near grain boundaries. These characteristics, as well as its chemical makeup, make it easily fabricated and extremely resistant to corrosive situations. Several elements are present in trace levels, totaling less than 1%. It provides great corrosion resistance and adaptability, allowing it to be used in a variety of industries. It has good corrosion resistance against caustic soda, chlorine gas, and other chemicals. These products elemental constraints are merged into a single, dual-certified chemistry, resulting in a single alloy with the requisite properties.

UNS R50400 Blind Flanges, Titanium Gr 2 Square Flange, Titanium Gr 2 Slip On Flange, Ti Alloy Gr 2 Lap Joint Flanges, ANSI B16.5 Titanium Gr.2 RTJ Flanges, Ti Alloy Gr 2 WNRF Flange, DIN 3.7035 Socket Weld Flanges, Titanium Alloy Gr 2 Flanges Manufacturer In Mumbai, India.

Titanium WNR 3.7035 Weld Neck Flanges have great ductility in a wide temperature range and excellent resistance in alkaline environments. The lower carbon chemistry is favoured for use at temperatures exceeding 600 degrees Fahrenheit (315 Degree C). Annealed alloys are easy to produce because to their low hardness, ductility, and weld ability. It is typically used for elements that require high corrosion resistance and magnetic strength, such as lead wires, battery components, transducers, sparking electrodes, and heat exchangers. Chemical processing and storage, synthetic fiber manufacture, and procedures involving sodium hydroxide and fluorine are all possible applications for this Ti-Alloy Gr 2 Blind Flanges. They are commonly employed in a variety of industrial areas. It is employed in caustic solutions, food processing equipment, and corrosion-resistant components and structures in general. Additional uses for this steel include aerospace, military, and food processing.

It is also utilized in electronic components and other applications where spinning to produce the result is particularly desirable. Grade 2 Titanium Socket Weld Flanges is useful in any setting with temperatures exceeding 600 degrees Fahrenheit. It is specifically utilized as a material for caustic soda manufacture equipment using the diaphragm electrolysis process. It is particularly resistant to caustic alkalis, even in the molten condition. Carbon content in this alloy becomes crucial when operating temperatures are projected to surpass 600 degrees Fahrenheit.

Titanium Gr.2 Flanges

Get a best quote for Titanium Alloy Gr 2 SORF Flanges, We Keep Bulk Stock of Titanium Gr.2 Flanges at our stockyard, contact us to request a quote.

Titanium Gr.2 Flanges Specifications

Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
EN 6Bar 10Bar 16Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types Forged / Threaded / Screwed / Plate
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
-BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A182 F316 Titanium Flanges
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

Ti Alloy Gr 2 Flanges Equivalent Grades

GradeUNS WERKSTOFF NR.
Ti Gr 2R504003.7035

Titanium Gr.2 Flanges Chemical Composition

GradeTiCFeHNOAlV
Ti Grade299.2 min0.1 max0.3 max0.015 max0.03 max0.25 max--

Titanium Alloy Gr 2 Flanges Mechanical Properties

Grade

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Ti Gr24.5 g/cm31665 °C (3030 °F)Psi – 49900 , MPa – 344Psi – 39900 , MPa – 27520 %

Various Types Of Titanium Gr.2 Flanges

Titanium Gr 2 Socket Weld Flanges

Titanium Gr 2 Socket Weld Flanges

Titanium Gr 2 SWRF Flanges ANSI B16.5 Ti Alloy Gr 2 Socket weld Flanges DIN 3.7035 SWRF Flanges UNS R50400 Socket weld Flanges
Titanium Gr 2 Lap Joint Flanges

Titanium Gr 2 Lap Joint Flanges

Ti Alloy Gr 2 LJ Flanges ANSI B16.5 Titanium Gr 2 Lap Joint Flange DIN 3.7035 Lap Joint Flange UNS R50400 Lapped Joint Flanges
Titanium Gr 2 Slip On Flanges

Titanium Gr 2 Slip On Flanges

DIN 3.7035 Slip On Flanges Ti Alloy Gr 2 Slip On Flanges ANSI B16.5 Titanium Gr 2 SORF Flanges UNS R50400 SORF Flanges
Titanium Gr 2 Forged Flanges

Titanium Gr 2 Forged Flanges

UNS R50400 Forged Flanges ANSI B16.5 Titanium Gr 2 Forged Flanges DIN 3.7035 Forged Flanges Ti Alloy Gr 2 Forged Flanges
Titanium Gr 2 Orifice Flanges

Titanium Gr 2 Orifice Flanges

UNS R50400 Orifice Flanges Ti Alloy Gr 2 Orifice Flanges ANSI B16.5 Titanium Gr 2 Orifice Flanges DIN 3.7035 Orifice Flanges
Titanium Gr 2 Blind Flanges

Titanium Gr 2 Blind Flanges

ANSI B16.5 Titanium Gr 2 Blind Flange UNS R50400 Blind Flange Ti Alloy Gr 2 BLRF Flanges DIN 3.7035 BLRF Flanges
Titanium Gr 2 Weld Neck Flanges

Titanium Gr 2 Weld Neck Flanges

ANSI B16.5 Titanium Gr 2 Weld Neck Flanges UNS R50400 Welding Neck Flanges Ti Alloy Gr 2 WNRF Flanges DIN 3.7035 Weld Neck Flanges
Titanium Gr 2 Reducing Flanges

Titanium Gr 2 Reducing Flanges

UNS R50400 Reducing Flanges ANSI B16.5 Titanium Gr 2 Reducing Flanges DIN 3.7035 Reducing Flanges Ti Alloy Gr 2 Reducing Flanges
Titanium Gr 2 Threaded Flanges

Titanium Gr 2 Threaded Flanges

ANSI B16.5 Titanium Gr 2 Threaded Flanges Ti Alloy Gr 2 Threaded Flanges UNS R50400 Threaded Flanges DIN 3.7035 Threaded Flanges
Titanium Gr 2 Long Weld Neck Flanges

Titanium Gr 2 Long Weld Neck Flanges

UNS R50400 Long Weld Neck Flanges ANSI B16.5 Titanium Gr 2 LWN Flanges DIN 3.7035 Long Weld Neck Flanges Ti Alloy Gr 2 LWN Flanges
Titanium Gr 2 Spectacle Blind Flanges

Titanium Gr 2 Spectacle Blind Flanges

Ti Alloy Gr 2 Spectacle Blind Flanges UNS R50400 Spectacle Blind Flanges DIN 3.7035 Spectacle Blind Flanges ANSI B16.5 Titanium Gr 2 Spectacle Blind Flanges
Titanium Gr 2 Ring Type Joint Flanges

Titanium Gr 2 Ring Type Joint Flanges

UNS R50400 Ring Type Joint Flanges ANSI B16.5 Titanium Gr 2 Ring Type Joint Flanges DIN 3.7035 RTJ Flanges Ti Alloy Gr 2 RTJ Flanges

Weight Chart Of Titanium Gr.2 Flanges

Pipe Normal Diam. O.D. Flange  Thk. Of Flange Min  Diam.
of
Hub 
Diameter of Raised Face  Length Hub.Y Thread Length Diam. 
of Bolt
Circle
Diam. 
of Bolt
Holes
Number
of Bolts
Diam. of
Bolts
(inch)
KG LB
inch dn O C X G Y T BC BH BN BD
1/2" 15 89.00 11.20 30.20 35.10 15.70 15.70 60.50 15.80 4 1/2" 0.4 0.9
3/4" 20 98.50 12.70 38.10 42.90 15.70 15.70 69.90 15.80 4 1/2" 0.7 1.5
1" 25 108.00 14.20 49.30 50.80 17.50 17.50 79.30 15.80 4 1/2" 0.8 1.8
1-1/4" 32 117.50 15.70 58.70 63.50 20.60 20.60 88.90 15.80 4 1/2" 1.2 2.6
1-1/2" 40 127.00 17.50 65.00 73.20 22.40 22.40 98.60 15.80 4 1/2" 1.5 3.3
2" 50 152.50 19.10 77.70 91.90 25.40 25.40 120.70 19.10 4 5/8" 2.3 5.1
2-1/2" 65 178.00 22.40 90.40 104.60 28.40 28.40 139.70 19.10 4 5/8" 3.7 8.1
3" 80 190.50 23.90 108.00 127.00 30.20 30.20 152.40 19.10 4 5/8" 4.1 9
3-1/2" 90 216.00 23.90 122.20 139.70 31.80 31.80 177.80 19.10 8 5/8" 5.1 11.2
4" 100 228.50 23.90 134.90 157.20 33.30 33.30 190.50 19.10 8 5/8" 5.9 13
5" 125 254.00 23.90 163.60 185.70 36.60 36.60 215.90 22.40 8 3/4" 7 15.4
6" 150 279.50 25.40 192.00 215.90 39.60 39.60 241.30 22.40 8 3/4" 8.4 18.5
8" 200 343.00 28.40 246.10 269.70 44.50 44.50 298.50 22.40 8 3/4" 13 28.6
10" 250 406.50 30.20 304.80 323.90 49.30 49.30 362.00 25.40 12 7/8" 18 39.5
12" 300 482.50 31.80 365.30 381.00 55.60 55.60 431.80 25.40 12 7/8" 29 64
14" 350 533.50 35.10 400.10 412.80 57.20 57.20 476.30 28.50 12 1" 39 86
16" 400 597.00 36.60 457.20 469.90 63.50 63.50 539.80 28.50 16 1" 47 103
18" 450 635.00 39.60 505.00 533.40 68.30 68.30 577.90 31.80 16 1 1/8" 57 126
20" 500 698.50 42.90 558.80 584.20 73.20 73.20 635.00 31.80 20 1 1/8" 76 167
24" 600 813.00 47.80 663.40 692.20 82.60 82.60 749.30 35.10 20 1 1/4" 97 214

You need our support, to have any projects?

Ready Stock of Titanium Gr.2 Flanges

  • 3.7035 Raised Face Flanges
  • Titanium Gr.2 BLRF Flanges
  • Titanium Alloy Gr 2 Threaded Flanges
  • Titanium Gr.2 RTJ Flanges
  • ASTM A182 Titanium Gr 2 Slip On Flanges
  • Titanium WERKSTOFF NR. 3.7035 SORF Flange
  • ANSI B16.5 Titanium Gr.2 Flanges
  • Titanium Gr.2 Flanges
  • Ti Alloy Gr 2 Flanges Supplier
  • ASTM A182 Titanium Grade 2 Square Flanges
  • Titanium Gr.2 Blind Flange
  • ASME SA182 Titanium Alloy Gr 2 Pipe Flanges
  • Titanium Gr.2 Orifice Flanges
  • Titanium Alloy Gr 2 Screwed Flanges
  • Ti Grade 2 Long Weld Neck Flanges Stockist
  • Titanium Gr.2 Welding Neck Flanges
  • Ti Alloy Gr 2 RTJ Flanges
  • Titanium Gr.2 Lapped Joint Flanges
  • 15 NB SCH 10 Ti Alloy Gr 2 Welding Neck Flanges
  • Titanium Gr.2 Lap Joint Flanges
  • Titanium Alloy Gr 2 Forged Flanges
  • Ti Grade 2 Socket weld Flanges
  • Titanium Alloy Gr 2 Slip On Flanges

  • Ti Alloy Gr 2 Class 150 Flanges
  • ANSI B16.5 Ti Alloy Gr 2 Plate Flanges
  • Titanium Alloy Gr 2 Industrial Flange
  • Titanium Gr.2 Forged Flanges
  • Titanium Gr.2 WNRF Flange
  • DIN 3.7035 Flat Flanges
  • Titanium Alloy Gr 2 Class 2500 Flange Manufacturer
  • Titanium Alloy Gr 2 Screwed Flanges
  • ASME SA182 Ti Grade 2 Orifice Flanges Stockholder
  • Titanium Gr.2 Class 900 Flanges
  • Titanium Alloy Gr 2 Raised Face Flanges
  • UNS R50400 BLRF Flange
  • Titanium Gr.2 Raised Face Flanges
  • ASTM A182 Titanium Alloy Gr 2 RTJ Flanges
  • Ti Grade 2 Nippolet Flange Exporter
  • Titanium Gr.2 SWRF Flange
  • Titanium Alloy Gr 2 Blind Flange
  • ANSI B16.5 Titanium Alloy Gr 2 SORTJ Flange
  • Titanium Gr.2 Pipe Flanges
  • Titanium Gr.2 Threaded Flanges
  • Ti Alloy Gr 2 Flanges Distributor
  • Ti Grade 2 Ring Type Joint Flange Manufacturer
  • ASME B16.5 Ti Alloy Gr 2 Forged Flanges

Ti Grade 2 Flanges Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%