Alloy 20 Round Bar, Ready Stock Of Grade 20 Alloy Hollow Bars, Manufacturer of ASTM B473 Gr 20 Bright Bar, Carpenter 20 Square Bar, Incoloy® Alloy 20 Bars Supplier in Mumbai.
Unifit Metal Alloys is Supplier of Alloy 20 Bars, which processes similarly to other varieties, producing tough, stringy chips with maximal feeds and moderate speeds for the optimum mach inability. After homogeneous heating to 2150° F(1177 Degree C), most conventional hot work procedures may be effectively applied to this WNR 2.4660 Square Bars. Because forming processes should be completed at room temperature if feasible, this amounts to around 70 surface feet per minute when employing high speed steel tooling for such a product. Copper back-up plates for quicker heat rejection are functional; however surface-fusing the copper back-up plate is not permitted to avoid fractures in the solder metal.Its maximum dry air service temperature is 1100 degrees Celsius.
Incoloy® Alloy 20 Flat Bar, Alloy 20 Threaded Bar, UNS N08020 Forged Bar, DIN 2.4660 Hot Rolled Bar, Carpenter 20Cb-3® Hex Bar, Grade 20 Alloy Rectangular Bar, Alloy EN NiCr20CuMo Hollow Bars, ANSI B16.9 Gr 20 Alloy Round Bar Manufacturer In Mumbai, India.
UNS N08020 Flat Bars is widely used in all high-temperature situations that demand scaling and corrosion resistance, as well as high-temperature strength and creep resistance. They are widely regarded among our clientele for their long lasting life and resilience to wear and strain. It is steel with low carbon content. Most welding processes are suitable for it, albeit oxyacetylene welding is not suggested due to the possibility of carbon pick up in the weld region. For this steel, do not forge below 1800 degrees Fahrenheit (982 degrees Celsius), since quick cooling is essential to enhance corrosion resistance. It is frequently used in power reactors, thermal treatment, and food processing.
Alloy 20Cb3 Threaded Bars is resistant to oxidation up to 2000 degrees Fahrenheit, has moderate strength at high temperatures, is resistant to hot corrosion, and has strength and toughness at cryogenic temperatures. It has a far higher coefficient of thermal expansion than non-alloyed steels because, with lower thermal conductivity, more deformation is to be expected.Because of the high chromium and nickel content, the steel has great oxidation resistance and strong strength at high temperatures. This alloy's high chromium and nickel concentrations give similar corrosion resistance, higher oxidation resistance, and the retention of a larger proportion of room temperature strength than conventional austenitic alloys.
Get a best quote for Alloy 20 Round Bar, We Keep Bulk Stock of Carpenter 20 Hexagon Bar at our stockyard, contact us to request a quote.
Alloy 20 Round Bar Specifications
| Monel 400 Bar Standard | ASTM B473, ASTM B865, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Monel K500 Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Monel 400 Round bar size | Diameter: 3-~800mm |
| Monel K500 Hex Bar size | 2-100mm A/F |
| Monel Alloy 400 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Monel K500 Square bar size | 4 to 100mm |
| Alloy 400 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Alloy K500 Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Monel 400 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM B473 Type K500 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Monel Alloy 400 Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Monel K500 Rectangular Size | 33 x 30mm to 295 x 1066mm |
| 400 Alloy Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM B473 Type K500 Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| JIS NW 4400 T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Monel K500 Flat Bars Condition | Hardened & tempered, annealed |
| ASTM B473 Type 400 Cold Rolled Bar Technique | K500 Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Monel Alloy 400 Rod Processing | Bar cutting to 650mm |
| 400 Alloy Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Our K500 Monel Round bar conforms to NACE MR0175/ISO 15156 | |
