Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Carbon Steel Round Bar

  • Home
  • Carbon Steel Round Bar

Carbon Steel Round Bar, Ready Stock Of CS A350 Hollow Bars, Manufacturer of ASTM A105 Carbon Steel Bright Bar, A105 CS Square Bar, A105 Carbon Steel Bars Supplier in Mumbai.

Unifit Metal Alloys is an acknowledged supplier and manufacturer of CS Round Bars, which is widely considered to be the most prevalent austenitic metal.

Carbon Steel Square Bars is used in industries that makes tyre covers, hose fittings, household appliances, exhaust manifolds, and other places. It's also used in steel hardware, pressure containers, storage barrels, and piping. Cold casting of screws, bolts, and fasteners requires a lower work hardening rate of this product. It is not susceptible to thermal stress or cycle heating. It is resistant to sulphidation and other types of hot corrosion due to its high chromium and nickel concentration. It has better oxidation protection and retains a greater proportion of room temperature strength than typical austenitic alloys. Under slightly cyclic circumstances, it can withstand oxidation up to 2010 degrees F.

Carbon Steel A105 Flat Bar, CS A105 Threaded Bar, A105 Carbon Steel Forged Bar, Carbon Steel Hot Rolled Bar, Carbon Steel Cold Drawn Hex Bar, ASTM A350 Carbon Steel Rectangular Bar, Mild Steel Hollow Bars, ANSI B16.9 Carbon Steel Hot Rolled Round Bar Manufacturer In Mumbai, India.

Carbon Steel Flat Bars is frequently used at cryogenic temps because of its high toughness and limited magnetic leakage. It is found in fluidised bed combustors, tube hangers for hydrocarbon processing and steam furnaces, kilns, radiant tubes, and other applications. Because of the high chromium and nickel composition, this alloy has good oxidation protection and high strength at high temperatures. It has great oxidation protection and better strength at temps up to 2100 degrees Fahrenheit. The primary features of these goods are their high chromium and medium nickel concentration, which makes them resistant to oxidation, sulfidation, and other types of hot corrosion.

Carbon Steel Threaded Bars demonstrates corrosion and longevity resistance. It contains less carbon, which improves corrosion protection after soldering. It has a hearty amount of chromium, which is the alloy that gives carbon steels their famed corrosion resilience. They are both non-hardenable through thermal treatment and easily shaped and drawn. It can be easily brake or roll formed into a number of components for architectural, commercial, and transportation uses. They are both heat-hardenable but easily made and drawn. These key qualities are their high chromium and middling nickel concentration, which makes them resistant to oxidation, sulfidation, and other forms of hot corrosion.

Carbon Steel Round Bar

Get a best quote for Carbon Steel Round Bar, We Keep Bulk Stock of Carbon Steel A105 Hexagon Bar at our stockyard, contact us to request a quote.

Carbon Steel Round Bar Specifications

Carbon Steel Bar Standard ASTM A105, ASTM A479, AMS 5513, AMS 5511, AMS 5647
Carbon Steel Bar Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Carbon Steel Round bar size Diameter: 3-~800mm
Carbon Steel Hex Bar size 2-100mm A/F
Carbon Steel Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Carbon Steel Square bar size 4 to 100mm
Carbon Steel Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Carbon Steel Rectangular Bars Section 3.0 to 12.0mm thickness
Carbon Steel Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
ASTM A105 Type Carbon Steel Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Carbon Steel Threaded Bar Billet Size 1/2 to 495mm Diameter
Carbon Steel Rectangular Size 33 x 30mm to 295 x 1066mm
Carbon Steel Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
ASTM A105 Type Carbon Steel Hollow Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Carbon Steel T-Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Rolled Carbon Steel Flat Bars Condition Hardened & tempered, annealed
ASTM A105 Type Carbon Steel Cold Rolled Bar Technique Carbon Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Carbon Steel Rod Processing Bar cutting to 650mm
Carbon Steel Rounds Bar Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Our Carbon Steel Round bar conforms to NACE MR0175/ISO 15156

Various Types Of Carbon Steel Round Bar

Carbon Steel Round Bars

Carbon Steel Round Bars

CS A105 Round Bars Carbon Steel Hot Rolled Round Bars ASTM A350 Carbon Steel Round Bars ANSI B16.9 CS A105 Round Bars
Carbon Steel Flat Bars

Carbon Steel Flat Bar

ASTM A105 Carbon Steel Flat Bar Carbon Steel Cold Drawn Flat Bar Carbon Steel A350 LF2 Flat Bar ANSI B16.9 CS A350 LF2 Flat Bar
Carbon Steel Hexagone Bars

Carbon Steel Hexagone Bars

CS A105 Hexagone Bars Carbon Steel Hot Rolled Hexagone Bars ASTM A350 Carbon Steel Hexagone Bars ANSI B16.9 CS A105 Hexagone Bars
Carbon Steel Threaded Rods

Carbon Steel Threaded Rods

ASTM A105 Carbon Steel Threaded Rods Carbon Steel Cold Drawn Threaded Rods Carbon Steel A350 LF2 Threaded Rods ANSI B16.9 CS A350 LF2 Threaded Rods
Carbon Steel Matt Finish Round Bars

Carbon Steel Matt Finish Round Bars

CS A105 Matt Finish Round Bars Carbon Steel Hot Rolled Matt Finish Round Bars ASTM A350 Carbon Steel Matt Finish Round Bars ANSI B16.9 CS A105 Matt Finish Round Bars
Carbon Steel Hollow Bar

Carbon Steel Hollow Bar

ASTM A105 Carbon Steel Hollow Bar Carbon Steel Cold Drawn Hollow Bar Carbon Steel A350 LF2 Hollow Bar ANSI B16.9 CS A350 LF2 Hollow Bar
Carbon Steel T-Bar

Carbon Steel T-Bar

CS A105 T-Bar Carbon Steel Hot Rolled T-Bar ASTM A350 Carbon Steel T-Bar ANSI B16.9 CS A105 T-Bar
Carbon Steel Triangle Bar

Carbon Steel Triangle Bar

ASTM A105 Carbon Steel Triangle Bar Carbon Steel Cold Drawn Triangle Bar Carbon Steel A350 LF2 Triangle Bar ANSI B16.9 CS A350 LF2 Triangle Bar

Carbon Steel Round Bar Standards

Standard Description
ASTM A105 Specification for Carbon Steel Bars and Shapes
ASTM A314 Specification for Carbon Steel Billets and Bars for Forging
ASTM A493 Specification for Carbon Steel Wire and Wire Rods for Cold Heading and Cold Forging
ASTM A564 Specification for Hot-Rolled And Cold-Finished Age-Hardening Carbon Steel Bars and Shapes
ASTM A565 Specification for Martensitic Carbon Steel Bars, Forgings, and Forging Stock for High Temperature Service
ASTM A582 Specification for Free Machining Carbon Steel Bars
ASTM A666 Specification For Annealed or Cold-Worked Austenitic Carbon Steel Flat Bar


Carbon Steel Round Bar Sizes

US Bar Metric Japanese Canadian/ASTM
Diameter(Inch) Carbon Steel Bar Size Diameter (millimeter) Carbon Steel Bar Size Diameter (millimeter) Carbon Steel Bar Size Diameter (millimeter2) Carbon Steel Bar Size
0.250 #2 5 5 6 6 100 10M
0.375 #3 5.5 5.5 10 10 200 15M
0.500 #4 6 6 13 13 300 20M
0.625 #5 7 7 16 16 500 25M
0.750 #6 8 8 19 19 700 30M
0.875 #7 9 9 22 22 1000 35M
1.000 #8 10 10 25 25 1500 45M
1.125 #9 11 11 29 29 2500 55M
1.250 #10 12 12 32 32
1.375 #11 14 14 35 35
1.500 #12 16 16 38 38
1.625 #13 18 18 41 41
1.750 #14 20 20 44 44
1.875 #15 22 22 48 48
2.000 #16 25 25 51 51
2.250 #18 28 28 57 57
32 32
36 36
40 40
44 44
50 50

Carbon Steel Round Bar Weight Chart

Carbon Steel Bar Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot
1/8" 0.062 0.019 22 millimeter 2.979 0.908 3 to 1/4" 41.996 12.800
3 millimeter 0.055 0.017 20 millimeter 2.470 0.753 3" 35.762 10.900
4 millimeter 0.098 0.030 24 millimeter 3.543 1.080 3 to 3/4" 55.780 17.001
5/32" 0.095 0.029 7/8" 3.038 0.926 3 to 1/2" 48.772 14.850
5 millimeter 0.154 0.047 1" 3.970 1.210 4 to 1/4" 72.249 21.908
3/16" 0.141 0.043 25 millimeter 3.871 1.180 4" 63.340 19.306
6 millimeter 0.223 0.068 27 millimeter 4.490 1.368 4 to 3/4" 90.249 27.366
7/32" 0.190 0.058 26 millimeter 4.170 1.271 4 to 1/2" 80.340 24.4487
7 millimeter 0.298 0.091 30 millimeter 5.548 1.691 5 to 1/2" 121.000 36.690
1/4" 0.249 0.076 1 to 1/8" 5.033 1.534 5" 99.940 30.461
8 millimeter 0.398 0.120 32 millimeter 6.314 1.894 6 to 1/2" 167.630 51.093
5/16" 0.387 0.118 1 to 1/4" 6.349 1.924 6" 143.900 43.860
3/8" 0.557 0.170 35 millimeter 7.553 2.390 7 to 1/2" 225.000 68.226
9 millimeter 0.498 0.152 1 to 3/8" 7.550 2.303 7" 196.000 59.432
11 millimeter 0.748 0.228 38 millimeter 8.903 2.792 10" 397.140 121.048
10 millimeter 0.620 0.189 36 millimeter 7.999 2.438 8" 254.55 77.586
12 millimeter 0.889 0.271 40 millimeter 9.872 3.009      
7/16" 0.761 0.232 1 to 1/2" 8.951 2.715      
13 millimeter 1.043 0.318 1 to 3/4" 12.179 3.712      
1/2" 0.994 0.303 1 to 5/8" 10.449 3.200      
9/16" 1.256 0.383 1 to 7/8" 13.977 4.260      
14 millimeter 1.207 0.368 45 millimeter 12.555 3.807      
5/8" 1.551 0.473 50 millimeter 15.414 4.698      
15 millimeter 1.391 0.424 48 millimeter 14.205 4.330      
17 millimeter 1.791 0.543 2 to 1/8" 17.963 5.475      
16 millimeter 1.578 0.481 2" 15.906 4.848      
18 millimeter 2.001 0.610 60 millimeter 22.205 6.768      
11/16" 1.880 0.573 2 to 1/4" 20.128 6.135      
3/4" 2.237 0.682 2 to 3/8" 22.435 6.838      
      2 to 1/2" 24.856 7.576      
      2 to 5/8" 27.409 8.354      
      2 to 3/4" 30.083 9.169

You need our support, to have any projects?

Ready Stock of Carbon Steel Round Bar

  • Carbon Steel Round Bar
  • ASTM A105 Carbon Steel Hollow Bars
  • A105 CS Bright Bar Supplier
  • ASME SA350 Carbon Steel Bars
  • Carbon Steel Hot Rolled Bars & Rods
  • CS A105 Square Bar
  • ASTM A105 Carbon Steel Flat Bar
  • Mild Steel Threaded Bar Stockist
  • Carbon Steel A350 LF2 Rod
  • CS AISI 1018 Round Bar
  • Carbon Steel Cold Drawn Forged Bar
  • Carbon Steel AISI 1045/C45 Hot Rolled Bar
  • CS AISI 4140 Hex Bar
  • ASTM A350 Carbon Steel Rectangular Bar
  • CS AISI 52100 Forged Bars
  • Carbon Steel AISI 4340 Round Bar
  • Carbon Steel AISI 8620 Hexagonal Rods
  • CS AISI 8630 180° Hexagon Bar
  • JIS A105 Polished Bright Bar
  • CS EN-9 Precision Ground Bar
  • CS UNS K03504 Threaded Bar
  • ANSI B16.9 Carbon Steel LF2 Round Bar
  • CS A350 LF2 T-Bar

  • ASTM A350 Carbon Steel T-Bar
  • Carbon Steel EN-9 Round Bar
  • Carbon Steel A350 LF2 Cold Drawn Round Bar
  • Carbon Steel 20Mncr5 Half-Round Bar
  • Carbon Steel Hot Rolled Black Bar
  • ASME SA350 CS 4130 Triangle bar Stockholder
  • Carbon Steel EN-19 Sheared & Edged Bar
  • JIS A105 Welding Rods
  • CS AISI 1018 Spring Bar
  • ASTM A105 Carbon Steel Round Bar Manufacturer
  • Carbon Steel Cold Drawn Blank Sheet Bar
  • ASTM A350 Carbon Steel Black Bar
  • Carbon Steel 20Mncr5 Reducing Nipple
  • CS UNS K03504 Polished Bars Exporter
  • ANSI B16.9 Carbon Steel LF2 Bars & Rods
  • CS Bars ASTM A105 Hardened & Tempered Bar
  • Standard ASTM 4140 Carbon Steel Grinded Machined Bar
  • ANSI B16.9 Carbon Steel Round Bar
  • CS A105 Large Diameter Bars
  • CS AISI 1018 Hollow Bars Distributor
  • ASTM A105 Carbon Steel Flat Bar Sizes Manufacturer
  • CS AISI 1045/C45 Hexagon Bar
  • ASME B16.9 Carbon Steel 1018 Forged Bars

Carbon Steel Round Bar Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%