Ready Stock Of Inconel Alloy 625 Hollow Bars, Manufacturer of ASTM A166 Inconel 625 Bright Bar, 625 Inconel Square Bar, Alloy 625 Round Bar, Inconel 625 Bars Supplier in Mumbai.
Unifit Metal Alloys is a exporter and manufacturer of Inconel Alloy 625 Round Bars, whichis a high temperature resistant grade with excellent resistance to general corrosion, pitting, and stress corrosion cracking. Inconel UNS N06625 Flat Bars is a chromium-nickel-molybdenum austenitic steel designed to increase corrosion resistance in moderately corrosive settings. It is more resistant to general corrosion and pitting in molybdenum bearing austenitic steels than typical nickel chromium steels.It is a low-carbon variant that reduces hazardous carbide precipitation caused by welding. It has a high strength grade, is resilient to atmospheric erosion, and has a bright, attractive surface that makes it an excellent choice for aesthetic structural applications. In the annealed state, it is virtually non-magnetic and can only be toughened by cold working.
UNS N06625 Forged Bar, 625 Inconel Hex Bar, Inconel 625 Flat Bar, Inconel® Alloy 625 Threaded Bar, Alloy 625 Hollow Bars, Inconel Alloy 625 Round Bar, Nickel Alloy 625 Rectangular Bar, DIN 2.4856 Hot Rolled Bar Manufacturer In Mumbai, India.
Inconel WNR 2.4856 Threaded Bars is suitable for use in heavy gauge (over 6mm) welded components. This makes our solution particularly appealing for situations where salt exposure is a concern. It has a larger carbon content, which boosts strength (especially at temperatures exceeding 500 degrees Celsius), but it should not be utilised in situations where sensitization corrosion is possible. We have been able to provide a high quality variety of this alloy within the time constraints due to our highly experienced team of specialists. It also exhibits higher stress-to-rupture, creep, and tensile power at high temperatures. It may be tailored to specific industrial applications.
The stainless qualities of this Nickel Alloy 625 Hollow Bars are achieved by the creation of an invisible and adherent Chromium rich oxide layer. It is especially noticeable in chloride conditions for pitting and crevice corrosion. Because of the higher nickel concentration and the addition of molybdenum, this alloy is somewhat more expensive per ounce of material. It is the second most common grade in the steel family, accounting for around 20% of all steel manufactured. Furnace parts, exhaust manifolds, heat exchangers, pharmaceutical and photographic equipment, jet engine parts, valve and pump trim, digesters, tanks, chemical equipment, pulp, paper, evaporators, and textile processing equipment, parts exposed to marine atmospheres, and tubing are examples of typical applications for this alloy.
Get a best quote for Inconel 625 Round Bar, We Keep Bulk Stock of Inconel Alloy 625 Hexagon Bar at our stockyard, contact us to request a quote.
Inconel 625 Round Bar Specifications
| >Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
|---|---|
| >Standard | ASTM B166, ASME SB166 |
| >Hex Bar size | 2-100mm A/F |
| >Round bar size | Diameter: 3-~800mm |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| >Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| >Square bar size | 4 to 100mm |
| >Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| >Rectangular Bars Section | 3.0 to 12.0mm thickness |
| >Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| >Rectangles Size | 33 x 30mm to 295 x 1066mm |
| >Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| >Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| >Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| >Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
| >Condition | Hardened & tempered, annealed |
| >Technique | Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
| >Processing | Bar cutting to 650mm |
| >Form | Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc. |
