Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Stainless Steel 316 / 316L Sheets, Plates & Coils

  • Home
  • Stainless Steel Sheets, Plates & Coils

SS 316 Sheets, Manufacturer of ASTM A240 TP316 Coils, Stainless Steel 316 Chequered Plates, Ready Stock Of SS 316L Plates, 316L SS Perforated Sheet Supplier in Mumbai.

Unifit Metal Alloys is a recognised stockist and exporter of SS 316 / 316L Sheets, Plates & Coils, which is well-liked for characteristics such as corrosion resistance and high tensile strength.

Stainless Steel UNS S31600 Sheets is frequently used in furnaces, oil stoves, welding filler wire and electrodes, heat exchangers, and other applications. It resists atmospheric and other moderate kinds of rust better than other austenitic steels. Because of the high levels of chromium and nickel, this steel has great corrosion protection. Stainless Steel WNR 1.4401 Plates is an excellent corrosion-resistant substance for exterior furnishings such as railings and bollards. It is resistant to hypersensitivity (grain boundary carbide precipitation). Its corrosion resistance, simplicity of steam cleaning and sterilisation, and lack of surface coatings have all influenced its use in industrial restaurants and food preparation facilities.

SS 316L Embossed Sheets, 316L Stainless Steel Cold Rolled Sheets, Stainless Steel 316 Shim Sheets, DIN 1.4401 Hot Rolled Plates, SS 316 Half Hard Plates, ANSI B16.9 Stainless Steel 316L High Quality Plates, 316 SS 90 Sheets, UNS S31600 Polished Finishes Plates Manufacturer In Mumbai, India.

316 Stainless Steel Coils is frequently used in chemical processing, equipment, rubber, plastics, pulp and paper machines, laboratory tables and equipment, and other applications. It is also used in textile industry equipment, pharmaceutical manufacturing equipment, architectural equipment, and other applications. Stainless Steel UNS S31603 Sheets is commonly used in food processing, photography, chemical processing, marine exterior trim, pharmaceutical, and textile finishing equipment. In the heated state, it is nonmagnetic. A post-work annealing in this steel is suggested to improve rust protection. It has good resilience to higher concentration solutions at temps below 38 degrees Celsius.

Because of its minimal carbon concentration, Stainless Steel WNR 1.4404 Plates is extremely immune to intergranular corrosion. The squat carbon element constituent in these products enables for welding without intergranular erosion from chromium carbide, allowing them to be used as-welded. It should be sufficient to withstand frequent contact in most highly corrosive uses. 316L Stainless Steel Coils is heated between 1010 degrees Celsius and 1121 degrees Celsius before chilling. It is frequently used in soap and photography handling equipment, textile industry equipment, architectural, and pharmaceutical manufacturing equipment, among other things. Because it does not react to thermal treatment, cold work increases both hardness and strength.

Stainless Steel 316 / 316L Sheets, Plates & Coils

Get a best quote for SS TP316 Quarter Hard Plates, We Keep Bulk Stock of Stainless Steel 316 Sheets, Plate And Coils at our stockyard, contact us to request a quote.

Stainless Steel 316 / 316L Sheets, Plates & Coils Specifications

Specifications ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled Plate 0.5-6.4 mm
Hot rolled Plate 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
International Standard ASTM A480
ASTM A959
ASME IID
EN ISO 9445
EN ISO 18286
EN 10051
EN 10088-1
ISO 15510
Tolerances (width / thickness) EN 10258/ DIN 59381)
EN 10151
EN 10088
Finish 2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Profiling Plasma Plate Cutting
Laser Plate Cutting
Oxy-propane Flame Cutting

SS 316 / 316L Sheets, Plates & Coils Equivalent Grades

STANDARD UNS WNR. AFNOR EN JIS BS GOST
SS 316 S31600 1.4401 / 1.4436 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3 SUS 316 316S31 / 316S33 -
SS 316L S31603 1.4404 / 1.4435 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2

Stainless Steel 316 / 316L Sheets, Plates & Coils Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 316 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 11.00 - 14.00 67.845 min
SS 316L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.89 min

316 / 316L Stainless Steel Sheets, Plates & Coils Mechanical Properties

Grade Tensile Strength(MPa) min Yield Strength 0.2% Proof (MPa) min Elong (% in 50mm) min
SS 316 515 205 40
SS 316L 485 170 40

Various Types Of Stainless Steel 316 / 316L Sheets, Plates & Coils

SS 316 / 316L Sheets

SS 316 / 316L Sheets

DIN 1.4401 45 Perforated Sheet UNS S31600 90 Shim Sheet SS 316 Hot Rolled Sheets ANSI B16.9 TP316L HR Sheet
SS 316 / 316L Plates

SS 316 / 316L Plates

UNS S31603 Hot Rolled Plates DIN 1.4404 CR Platesr 316 Stainless Steel Chequered Plate ANSI B16.9 SUS 316L Cold Rolled Plate
SS 316 / 316L Coils

SS 316 /316L Coils

ANSI B16.9 316L SS Hot Rolled Coils Stainless Steel 316 Cold Rolled Coil DIN 1.4401 Slit Coil UNS S31600 Strips Coils
SS 316 / 316L Shim Sheets

SS 316 / 316L Shim Sheets

316 Stainless Steel Shim Sheets ANSI B16.9 TP316L Shim Sheets UNS S31603 Shim Sheets DIN 1.4404 Shim Sheets
SS 316 / 316L Perforated Sheet

SS 316 / 316L Perforated Sheet

ANSI B16.9 SUS 316 Perforated Sheet UNS S31600 Perforated Sheet DIN 1.4401 Perforated Sheet Stainless Steel 316 Perforated Sheet
SS 316 / 316L Chequered Plates

SS 316 / 316L Chequered Plates

UNS S31603 Chequered Plates DIN 1.4404 Chequered Plates ANSI B16.9 316 SS Chequered Plates 316 Stainless Steel Chequered Plates
SS 316 / 316L Strip

SS 316 / 316L Strip

ANSI B16.9 TP316L Soft Strip UNS S31600 Soft Strip DIN 1.4401 Strip Stainless Steel 316 Strip
SS 316 / 316L Foils

SS 316 / 316L Foils

ANSI B16.9 SUS 316L Foils 316 Stainless Steel Foils DIN 1.4404 Foils UNS S31603 Foils

Stainless Steel 316 / 316L Sheets, Plates & Coils Finishes

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

Stainless Steel 316 / 316L Sheets, Plates & Coils Dimensions

Surface finish Gauge (in) Width (in)
2B – Cold rolled, heat treated, pickled, skin passed 10–24 max. 72*
2D – Cold rolled, heat treated, pickled 12–24 max. 60
BA Mexinox only 18–28 max. 48
Polished (not brushed) 11–24 max. 60
Temper rolled Mexinox only 13–29 max. 48

316 / 316L Stainless Steel Sheets, Plates & Coils Thickness Chart

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

Stainless Steel 316 / 316L Sheets, Plates & Coils Weight Chart

Plate Thickness (mm) Weight (kg/m) kg/meter (width 1200mm) kg/meter (width 1500mm) kg/meter (width 1800mm) kg/meter (width 2400mm)
3 23.55 28.3 35.3 42.4 56.5
4 31.4 37.7 47.1 56.5 75.4
5 39.25 47.1 58.9 70.7 94.2
6 47.1 56.5 70.7 84.8 113
8 62.8 75.4 94.2 113 150.7
10 78.5 94 118 141 188
12 94.2 113 141 170 226
16 125.6 151 188 226 301
20 157 188 236 283 377
22 172.7 207 259 311 415
25 196.25 236 294 353 471
28 219.8 264 330 396 528
32 251.2 301 377 452 603
36 282.6 339 424 509 678
40 314 377 471 565 754
45 353.25 424 530 636 848
50 392.5 471 589 707 942
55 431.75 518 648 777 1036
60 471 565 707 848 1130
65 510 612 765 918 1224
70 549.5 659 824 989 1319
75 588.75 707 883 1060 1413
80 628 754 942 1130 1507
90 706.5 848 1060 1272 1696
100 785 942 1178 1413 1884

You need our support, to have any projects?

Ready Stock of Stainless Steel 316 / 316L Sheets, Plates & Coils

  • 316 Stainless Steel Quarter Hard Plates
  • SS WERKSTOFF NR. 1.4404 Strips
  • Stainless Steel 316 Hot Rolled Plates
  • 316 Stainless Steel Shim Sheets
  • ASME SA240 TP316 Stainless Steel Coils
  • 316 SS Bright Annealed Finish (BA) Sheets
  • SS 316 Mat Pvc Sheets
  • Stainless Steel 316 Mirror Polish Plates
  • 316 SS Mill Finished Sheets
  • Stainless Steel 316 Cold Rolled Sheets
  • SS 316 Sheets
  • Stainless Steel 316 Sheets Stockist
  • ANSI B16.9 Stainless Steel 316 Industrial Plate
  • 1.4401 Heavy Plates
  • SS 316 Chequered Plates Supplier
  • ASTM A240 TP316 Polished Finishes Plates
  • 316 Stainless Steel Plates
  • Stainless Steel 316 Half Hard Plates
  • 15 NB SCH 10 SS 316 Plastic Coated Sheets
  • Stainless Steel 316 Perforated Sheet
  • ASTM A240 TP316 45 CR Plates
  • SS 316 Matt PVC Sheets
  • Stainless Steel 316 Spring Hard Plates

  • Stainless Steel 316 BA Finish Plates
  • ANSI B16.9 SS 316 High Quality Plates
  • Stainless Steel 316 2D Finish Plates
  • UNS S31600 4 Finish Sheets
  • 316 Stainless Steel 2B Finish Sheets
  • ASME B16.9 SS 316 Shim Sheets
  • 316 Stainless Steel Blank Sheets
  • Stainless Steel 316 Custom Length Plates
  • SS 316 Sheets Plate Cut To Size
  • Stainless Steel 316 4 Finish Sheets
  • 316 SS Rolls Manufacturer
  • Stainless Steel 316 Coils Exporter
  • DIN 1.4401 Mill Finished Plates
  • Stainless Steel 316 Hot Rolled Plates
  • ASME SA240 TP316 SS Sheets Stockholder
  • SS 316 NO.8 Finish Plates
  • Stainless Steel 316 Strips Traders
  • ASTM A240 TP316 Stainless Steel Blanks
  • SS 316 Embossed Sheets
  • ANSI B16.9 316 Stainless Steel Polish Coils
  • SS 316 Rings Distributor
  • 316 Stainless Steel Plates Manufacturer
  • Stainless Steel 316 Circle

316 / 316L SS Sheets, Plates & Coils Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%