Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Stainless Steel 904L Sheets, Plates & Coils

  • Home
  • Stainless Steel Sheets, Plates & Coils

SS 904L Sheets, 904L SS Perforated Sheet, Stainless Steel 904L Chequered Plates, Ready Stock Of SS 904L Plates, Manufacturer of ASTM A240 TP904L Coils Supplier in Mumbai.

Unifit Metal Alloys is a recognised stockist and seller of SS 904L Sheets, Plates & Coils, which are very much used at length in various applications due to their excellent corrosion resistance properties.

Stainless Steel UNS N08904 Sheets is a relatively low-expansion element that helps to counteract the thermal expansion of the other elements in the alloy. This means that the overall thermal expansion of the alloy is lower than that of other alloys by means of similar compositions. In addition to its low thermal expansion properties, this stainless steel is also known for its excellent resistance to high-temperature corrosion. This makes it an ideal choice for high-temperature applications that are exposed to corrosive environments, such as furnace linings, heat exchangers, and boiler components.

Stainless Steel 904L Shim Sheets, UNS N08904 Polished Finishes Plates, 904L Stainless Steel Cold Rolled Sheets, 904L SS 90 Sheets, SS 904L Half Hard Plates, DIN 1.4539 Hot Rolled Plates, SS 904L Embossed Sheets, ANSI B16.9 Stainless Steel 904L High Quality Plates Manufacturer In Mumbai, India.

The resistance of Stainless Steel WNR 1.4539 Plates to high-temperature corrosion is due to its high chromium and nickel content, which form a protective oxide layer on the surface of the alloy that acts as a barrier to protect the underlying metal from corrosion. Another benefit of the low thermal expansion of this stainless steel is its ability to maintain dimensional accuracy over a wide range of temperatures. This is especially important in applications such as aerospace and defense, where the alloy is exposed to extreme temperatures. The low thermal expansion of this stainless steel helps to prevent warping and other forms of damage that can occur when the alloy is exposed to extreme temperatures, which can cause equipment failure and even accidents.

In conclusion, this Alloy 904L Coils is known for its low thermal expansion properties, which makes it an ideal choice for a wide range of industrial and marine applications that require stability and dimensional accuracy at high temperatures. Its high nickel and chromium content, along with high carbon content, contribute to these properties. This is particularly beneficial in high-temperature applications such as furnace linings, heat exchangers, and boiler components, where the dimensional stability of the alloy is critical to ensure that the equipment operates efficiently and safely.

Stainless Steel 904L Sheets, Plates & Coils

Get a best quote for SS TP904L Quarter Hard Plates, We Keep Bulk Stock of Stainless Steel 904L Sheets, Plate And Coils at our stockyard, contact us to request a quote.

Stainless Steel 904L Sheets, Plates & Coils Specifications

Specifications ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled Plate 0.5-6.4 mm
Hot rolled Plate 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
International Standard ASTM A480
ASTM A959
ASME IID
EN ISO 9445
EN ISO 18286
EN 10051
EN 10088-1
ISO 15510
Tolerances (width / thickness) EN 10258/ DIN 59381)
EN 10151
EN 10088
Finish 2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Value Added Service Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Profiling Plasma Plate Cutting
Laser Plate Cutting
Oxy-propane Flame Cutting

SS 904L Sheets, Plates & Coils Equivalent Grades

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
SS 904L N08904 1.4539 Z2 NCDU 25-20 X1NiCrMoCu25-20-5 SUS 890L 904S13 -

Stainless Steel 904L Sheets, Plates & Coils Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
904L min. - - - - - 19.0 4.00 - 5.00 23.00 -
max. 0.20 2.00 1.00 0.045 0.035 23.0 28.00 -

904L Stainless Steel Sheets, Plates & Coils Mechanical Properties

Grade

Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
904L 490 220 35 75 -

Various Types Of Stainless Steel 904L Sheets, Plates & Coils

SS 904L Sheets

SS 904L Sheets

SS 904L Hot Rolled Sheets DIN 1.4539 45 Perforated Sheet ANSI B16.9 TP904L HR Sheet UNS N08904 90 Shim Sheet
SS 904L Plates

SS 904L Plates

904L Stainless Steel Chequered Plate UNS N08904 Hot Rolled Plates ANSI B16.9 SUS 904L Cold Rolled Plate DIN 1.4539 CR Platesr
SS 904L Coils

SS 904L Coils

ANSI B16.9 904L SS Hot Rolled Coils Stainless Steel 904L Cold Rolled Coil UNS N08904 Strips Coils DIN 1.4539 Slit Coil
SS 904L Shim Sheets

SS 904L Shim Sheets

DIN 1.4539 Shim Sheets 904L Stainless Steel Shim Sheets ANSI B16.9 TP904L Shim Sheets UNS N08904 Shim Sheets
SS 904L Perforated Sheet

SS 904L Perforated Sheet

UNS N08904 Perforated Sheet ANSI B16.9 SUS 904L Perforated Sheet DIN 1.4539 Perforated Sheet Stainless Steel 904L Perforated Sheet
SS 904L Chequered Plates

SS 904L Chequered Plates

UNS N08904 Chequered Plates DIN 1.4539 Chequered Plates 904L Stainless Steel Chequered Plates ANSI B16.9 904L SS Chequered Plates
SS 904L Strip

SS 904L Strip

UNS N08904 Soft Strip Stainless Steel 904L Strip DIN 1.4539 Strip ANSI B16.9 TP904L Soft Strip
SS 904L Foils

SS 904L Foils

DIN 1.4539 Foils UNS N08904 Foils ANSI B16.9 SUS 904L Foils 904L Stainless Steel Foils

Stainless Steel 904L Sheets, Plates & Coils Finishes

Surface Finish Definition Application
2B Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. Medical equipment, Food industry, Construction material, Kitchen utensils.
BA Those processed with bright heat treatment after cold rolling. Kitchen utensils, Electric equipment, Building construction.
NO.3 Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. Kitchen utensils, Building construction.
NO.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. Kitchen utensils, Building construction, Medical equipment.
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. Building Construction.
NO.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Chemical tank, pipe

Stainless Steel 904L Sheets, Plates & Coils Dimensions

Surface finish Gauge (in) Width (in)
2B – Cold rolled, heat treated, pickled, skin passed 10–24 max. 72*
2D – Cold rolled, heat treated, pickled 12–24 max. 60
BA Mexinox only 18–28 max. 48
Polished (not brushed) 11–24 max. 60
Temper rolled Mexinox only 13–29 max. 48

904L Stainless Steel Sheets, Plates & Coils Thickness Chart

Thickness Thickness Size Range Surface Area per Unit weight Approx Weight per Sheet
inches mm lbs/ft² kg/m² lbs kg
0.015 0.381 36 x 96 0.630 3.07566 15.12 6.84936
0.015 0.381 36 x 120 0.630 3.07566 18.90 8.5617
0.0178 0.45212 36 x 96 0.756 3.690792 18.15 8.22195
0.0178 0.45212 36 x 120 0.756 3.690792 22.68 10.27404
0.0178 0.45212 48 x 96 0.756 3.690792 24.19 10.95807
0.0178 0.45212 48 x 120 0.756 3.690792 30.24 13.69872
0.0235 0.5969 30 x 96 1.008 4.921056 20.16 9.13248
0.0235 0.5969 30 x 120 1.008 4.921056 25.20 11.4156
0.0235 0.5969 36 x 96 1.008 4.921056 24.19 10.95807
0.0235 0.5969 36 x 120 1.008 4.921056 30.24 13.69872
0.0235 0.5969 36 x 144 1.008 4.921056 36.29 16.43937
0.0235 0.5969 48 x 96 1.008 4.921056 32.26 14.61378
0.0235 0.5969 48 x 120 1.008 4.921056 40.32 18.26496
0.0235 0.5969 48 x 144 1.008 4.921056 48.39 21.92067
0.0291 0.73914 30 x 96 1.260 6.15132 25.20 11.4156
0.0291 0.73914 30 x 120 1.260 6.15132 31.50 14.2695
0.0291 0.73914 36 x 96 1.260 6.15132 30.24 13.69872
0.0291 0.73914 36 x 120 1.260 6.15132 37.80 17.1234
0.0291 0.73914 36 x 144 1.260 6.15132 45.37 20.55261
0.0291 0.73914 48 x 96 1.260 6.15132 40.32 18.26496
0.0291 0.73914 48 x 120 1.260 6.15132 50.41 22.83573
0.0291 0.73914 48 x 144 1.260 6.15132 60.49 27.40197
0.0355 0.9017 30 x 96 1.512 7.381584 30.24 13.69872
0.0355 0.9017 30 x 120 1.512 7.381584 37.80 17.1234
0.0355 0.9017 36 x 96 1.512 7.381584 36.29 16.43937

Stainless Steel 904L Sheets, Plates & Coils Weight Chart

Plate Thickness (mm) Weight (kg/m) kg/meter (width 1200mm) kg/meter (width 1500mm) kg/meter (width 1800mm) kg/meter (width 2400mm)
3 23.55 28.3 35.3 42.4 56.5
4 31.4 37.7 47.1 56.5 75.4
5 39.25 47.1 58.9 70.7 94.2
6 47.1 56.5 70.7 84.8 113
8 62.8 75.4 94.2 113 150.7
10 78.5 94 118 141 188
12 94.2 113 141 170 226
16 125.6 151 188 226 301
20 157 188 236 283 377
22 172.7 207 259 311 415
25 196.25 236 294 353 471
28 219.8 264 330 396 528
32 251.2 301 377 452 603
36 282.6 339 424 509 678
40 314 377 471 565 754
45 353.25 424 530 636 848
50 392.5 471 589 707 942
55 431.75 518 648 777 1036
60 471 565 707 848 1130
65 510 612 765 918 1224
70 549.5 659 824 989 1319
75 588.75 707 883 1060 1413
80 628 754 942 1130 1507
90 706.5 848 1060 1272 1696
100 785 942 1178 1413 1884

You need our support, to have any projects?

Ready Stock of Stainless Steel 904L Sheets, Plates & Coils

  • Stainless Steel 904L Sheets Stockist
  • ASTM A240 TP904L 45 CR Plates
  • 904L Stainless Steel Plates
  • SS WERKSTOFF NR. 1.4539 Strips
  • Stainless Steel 904L Cold Rolled Sheets
  • ANSI B16.9 Stainless Steel 904L Industrial Plate
  • SS 904L Sheets
  • 904L Stainless Steel Quarter Hard Plates
  • 1.4539 Heavy Plates
  • Stainless Steel 904L Half Hard Plates
  • ASTM A240 TP904L Polished Finishes Plates
  • SS 904L Mat Pvc Sheets
  • Stainless Steel 904L Hot Rolled Plates
  • 904L SS Mill Finished Sheets
  • Stainless Steel 904L Spring Hard Plates
  • SS 904L Chequered Plates Supplier
  • 904L Stainless Steel Shim Sheets
  • 15 NB SCH 10 SS 904L Plastic Coated Sheets
  • ASME SA240 TP904L Stainless Steel Coils
  • SS 904L Matt PVC Sheets
  • Stainless Steel 904L Perforated Sheet
  • 904L SS Bright Annealed Finish (BA) Sheets
  • Stainless Steel 904L Mirror Polish Plates

  • SS 904L Sheets Plate Cut To Size
  • Stainless Steel 904L Custom Length Plates
  • UNS N08904 4 Finish Sheets
  • Stainless Steel 904L Coils Exporter
  • 904L SS Rolls Manufacturer
  • SS 904L Embossed Sheets
  • Stainless Steel 904L BA Finish Plates
  • DIN 1.4539 Mill Finished Plates
  • SS 904L Rings Distributor
  • 904L Stainless Steel Circle
  • ASME SA240 TP904L SS Sheets Stockholder
  • Stainless Steel 904L Strips Traders
  • 904L SS 2B Finish Sheets
  • ANSI B16.9 SS 904L High Quality Plates
  • Stainless Steel 904L Hot Rolled Plates
  • 904L Stainless Steel Plates Manufacturer
  • ASME B16.9 SS 904L Shim Sheets
  • Stainless Steel 904L 4 Finish Sheets
  • ASTM A240 TP904L Stainless Steel Blanks
  • Stainless Steel 904L 2D Finish Plates
  • SS 904L NO.8 Finish Plates
  • 904L Stainless Steel Blank Sheets
  • ANSI B16.9 904L Stainless Steel Polish Coils

904L SS Sheets, Plates & Coils Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%