Ready Stock Of Ti Gr 7 Hollow Bars, Titanium Alloy Gr 7 Round Bar, Titanium Gr 7 Bars, Ti Alloy Gr 7 Square Bar, Manufacturer of ASTM B348 Alloy Gr 7 Bright Bar Supplier in Mumbai.
Unifit Metal Alloys is a supplier of Titanium Grade 7 Round Bars, whichcan only be hardened by cold working.
This product's uses include caustic evaporators, combustion boats, platter bars, and electronic components. Titanium UNS R52400 Threaded Bars has good weld ability and solder ability, as well as high electrical and thermal conductivity. When selecting the anneal temperature and time-at-temperature for this steel, care should be given because these can have a significant impact on the mechanical characteristics and structure of the material. It has a low base hardness and work-hardening rate, making it suitable for spinning and cold shaping.
ANSI B16.9 Alloy Gr 7 Round Bar, Gr7 Alloy Hex Bar, ASME SB348 Ti Gr 7 Threaded Bar, UNS R52400 Forged Bar, High Quality Titanium Gr 7 Rectangular Bar, DIN 3.7235 Hot Rolled Bar, Grade 7 Titanium Hollow Bars, Gr 7 Titanium Flat Bar Manufacturer In Mumbai, India.
While concentration and temperature can alter this alloy's resistance in specific situations, they are resistant to dry gases at room temperature. Titanium WNR 3.7235 Hollow Bars has high resistance in acids, alkalis, and neutral salt solutions, but it can corrode severely in oxidizing salt solutions. Because they are resistant to acids and alkalis, as well as dry gases at room temperature, they are easily welded and treated by typical shop fabrication procedures.Annealed material tends to generate lengthy, stringy chunks, whereas cold worked material will machine more readily.
Ti-Alloy Gr 7 Hexagonal Bars is mostly employed in reducing or neutral conditions, but it may also be used in oxidizing situations that result in the production of a passive layer. Depending on the temperature and concentration of the solution, it is also resistant to mineral acids. It is utilized in electronic components, electrical components, and heating element wires. It has strong corrosion resistance and is widely used to handle caustic soda, where it produces an oxide coating that protects it. Because this steel is used for aerospace and missile components, it can be shaped using any hot or cold working technique. Grade 7 Titanium Triangular Bars is suitable for usage in dry chlorine gas and hydrogen chloride at temperatures of up to 550 degrees Celsius (1,022 Degree F). While high-speed steel or cast-alloy equipment are suggested for handling and producing sodium hydroxide over 300 degrees Celsius, it is also used.
Get a best quote for Titanium Gr 7 Round Bar, We Keep Bulk Stock of Titanium Alloy Grade 7 Hexagon Bar at our stockyard, contact us to request a quote.
Titanium Gr 7 Round Bar Specifications
| Dimensions | DIN, EN, ASTM, JIS, ASME, BS, AISI |
|---|---|
| Round bar size | Diameter: 3-~800mm |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Billet Size | 1/2 to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Dimensions | Diameter / Height: |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
| Processing | Bar cutting to 650mm |
| Form | Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc. |
