Stainless Steel 904L Pipes & Tubes, Ready Stock Of SS 904L Tubing, Manufacturer of ASTM A312 TP904L Welded Tube, SS 904L Pipes, 904L SS Seamless Tubes Supplier in Mumbai.
Unifit Metal Alloys is a known exporter and stockist of SS 904L Pipes and Tubes, which are widely utilized in the chemical industry.
Stainless Steel UNS N08904 Seamless Pipes is commonly used in environmental scrubbers, ductwork, feed-water tubes, sewage water filters, heat exchanger tubes, ozone generators, and other applications. It is critical to avoid copper and zinc contamination at the weld site, as this might lead to cracking. It should not be forged below 1700 degrees Fahrenheit (930 Degree C). It can be utilized in applications where annealing after welding is not practicable and maximum corrosion resistance is required. This steel has enhanced strength, corrosion resistance (including crevice and pitting resistance), greater tensile strength, and a higher stress-to-rupture ratio. It has a greater chromium, nickel, and molybdenum content, which results in improved corrosion resistance, tensile strength, and creep strength.
UNS N08904 Seamless Pipes, SS 904L Butt Weld Fittings, 904L Stainless Steel Electropolish Pipe, SS 904L 90 Square Pipe, DIN 1.4539 Welded Pipes, Stainless Steel 904L ERW Pipes, ANSI B16.9 Stainless Steel 904L Heat Ex-changer Tubes, SS 904L Bush Hex Pipe Manufacturer In Mumbai, India.
Its key feature is the high molybdenum content in its chemical makeup, which ensures greater resistance to chemical assault when compared to chromium-nickel-molybdenum austenitic alloys. Stainless Steel WNR 1.4539 Welded Tubes are austenitic steels containing molybdenum that are more resistant to general corrosion and pitting/crevice corrosion than ordinary chromium-nickel austenitic alloys. At high temperatures, it possesses a high tensile and creep strength. Increased chromium, nickel, and molybdenum levels enhance chloride pitting resistance and overall corrosion. Because of its increased molybdenum concentration, it is molybdenum-bearing austenitic steel with somewhat improved corrosion resistance, notably to pitting.
In acetic and phosphoric acids, it is resistant to pitting. They are visible in surroundings containing chlorides or other halogens, such as marine conditions. 904L Stainless Steel Electropolish Pipes has strong oxidation resistance in intermittent service up to 1600 degrees Fahrenheit and continuous service up to 1700 degrees Fahrenheit. It has a high carbon content, which is utilized to prevent carbide precipitation during welding and in applications requiring highest corrosion resistance. They are utilized in chemical tankers, pulp and paper machinery, condenser and heat exchanger tubes, and other applications. When compared to typical alloys, it has even greater creep deformation properties and mechanical resilience to high temperatures.
Get a best quote for SS TP904L Pipes & Tubes, We Keep Bulk Stock of Stainless Steel 904L Seamless Bare Pipe at our stockyard, contact us to request a quote.
Stainless Steel 904L Pipes & Tubes Specifications
| 904L Pipes & Tubes Specifications | ASTM A312, A249, A269, A358 / ASME SA312, SA249, SA269, SA358 |
|---|---|
| Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| ASTM A312 TP 904L Seamless Pipe& Tube Size | 1 / 2" NB - 16" NB |
| ASTM A312 TP 904L Welded Pipe& Tube Size | 1 / 2" NB - 24" NB |
| ASTM A358 TP 904L EFW Pipe & Tube Size | 6" NB - 24" NB |
| Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| SS 904L Pipes & Tubes Manufacturing Shapes | Hydraulic, Round, Rectangle, Square, Hex, Honed |
| SS 904L Pipe & Tube Manufacturing Techniques | Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded |
| Stainless Steel 904L Pipe & Tube Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| SS 904L Pipes & Tubes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Delivery Condition of SS 904L Pipe & Tube | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
| Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
| Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM A 312 TP 904L 12" NB SCH 40S SEAMLESS HEAT NO. XXXX |
| Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements |
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Packing of SS 904L Pipes & Tubes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Specials | Sizes and Specifications other than above can be on request |
