Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Call Anytime +91 9833885906
Send Email sales@unifitmetalloys.com

API 5CT L80 13Cr Pipe

API 5CT Grade L80 13Cr Casing Pipe, API 5CT OCTG Tubing Supplier in Mumbai.

L80 steel from API 5CT is a type of corrosion-resistant casing. L80-1, L80-9Cr, and L80-13Cr are components of API L80 oil field pipes. L80-9Cr and L80-13Cr are utilised in CO2 environments, while API L80-1 is used in H2S environments. According to the SY/T6194-96 standard, API 5CT L80 Casing Tubing is available with a free length range of 8 to 13 metres. The quantity should be no more than 20%, although it is also available in at least 6m length. The API 5CT L80 Casing Tubing connector is not allowed to exhibit any of the aforementioned deformations on its outside.

Pipe and Tubes Factory
shape

Table of Content

L80 13Cr API OIL CASING PIPE, API 5CT GR. L80 13Cr SEAMLESS LINE PIPE, CARBON STEEL GR. L80 13Cr API 5CT TUBING, API 5CT PIPE, GRADE L80 13Cr API 5CT LINE PIPES, GR. L80 13Cr API 5CT SEAMLESS PIPES, API 5CT CASING PIPE, COLD ROLLED CARBON STEEL API 5CT PIPE AND TUBE Manufacturer In Mumbai, India.

Its primary use is in the OCTG tubing & casing and downhole completion equipment, and it is available in bar or tube form. Significant cost reductions in raw material procurement and manufacturing are possible when bill of material requirements can be matched against the variety of sizes available as compared to comparable bar products. As its use may be constrained by pH, chlorides, temperature, and H2S, this grade is best suited for mildly corrosive environments.

API 5CT Grade L80 13Cr Casing Pipe

Get a best quote for API 5CT GRADE L80 13Cr Carbon Steel Pipes, We Keep Bulk Stock of API 5CT L80 13Cr Carbon Steel Pipes at our stockyard, contact us to request a quote.

API 5CT L80 13Cr Pipe Specifications

Material L80 13Cr, steel grade
Specification API 5CT/ISO 11960
Wall Thickness 1.0milimeter – 30 milimeter
Outer Dia 4 1/2 Inch-20 Inch, (114.3-508milimeter)
Tubing Dimensions 26.7 milimeter (1.05 Inch) to 114.3 milimeter (4.5 Inch)
Casing Dimensions 114.3 milimeter (4.5 Inch) to 406.4 milimeter (16 Inch)
Length maximum 12000 milimeter
Thread type LC(Long round thread), SC(Short round thread), BC(Buttress thread)
API 5L API 5L GR.46 / 42 / 52 / 60 / 56 / 65 / 80/ 70

API 5CT L80 13Cr Pipes & Tubes Chemical Composition

C Si Mn P S Cr Ni Mo Cu Fe
Min 0.15 • 0.25 • • 12.00 • • • 0.00
Max 0.22 1.00 1.00 0.020 0.010 14.00 0.50 • 0.25 0.00

API 5CT L80 13Cr Pipes & Tubes Mechanical Properties

U.T.S 100 KSI Min (689 N/mm2)
0.2% Proof Stress 80 KSI Min (551 N/mm2)
Elongation 20 %
Red of Area 40 %
CVN Impacts @ -10°C (14°F) 20 Joules (15 ft-lbf)

Various Types Of API 5CT L80 13Cr Pipes & Tubes

API 5CT Casing and Tubing

API 5CT Casing and Tubing

API 5CT L-80 13Cr Casing Pipe

API 5CT L-80 13Cr Casing Pipe

API 5CT Grade L80 13Cr Type 1 Casing And Tubing

API 5CT Grade L80 13Cr Type 1 Casing And Tubing

L80 13Cr Pipe

L80 13Cr Pipe

L80 13Cr Tubing

L80 13Cr Tubing

API 5CT L80 13Cr Carbon Steel Line Pipes

API 5CT L80 13Cr Carbon Steel Line Pipes

API L80 13Cr Pipe

API L80 13Cr Pipe

API 5CT Pipe

API 5CT Pipe


L80 13Cr Casing Size

1/4 Inch IPS(.540 Inch O.D.) 4 Inch IPS(4.500 Inch O.D.)
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
3/8 Inch IPS(.675 Inch O.D.) 5 Inch IPS( 5.563 Inch O.D.)
1/8 Inch IPS(.405 Inch O.D.) 3 1/2 Inch IPS( 4.000 Inch O.D.)
Schedule 40, 80 Schedule 10, 40, 80, 160, XXH
Schedule 10, 40, 80 Schedule 10, 40, 80, 160, XXH
1/2 Inch IPS(.840 Inch O.D.) 6 Inch IPS(6.625 Inch O.D.)
Schedule 5, 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
1-1/4 Inch IPS(1.660 Inch O.D.) 12 Inch IPS(12.750 Inch O.D.)
Schedule 10, 40, 80, 160, XXH Schedule 10, 20, 40(.375), TRUE40(.406), Schedule80(.500)
1-1/2 Inch IPS(1.900 Inch O.D.) 14 Inch IPS(14.000 Inch O.D.)
Schedule 10, 40, 80, 160, XXH Schedule10 (.188), Schedule40 (.375)
2 Inch IPS(2.375 Inch O.D.) 16 Inch IPS(16.000 Inch O.D.)
3/4 Inch IPS(1.050 Inch O.D.) 8 ” IPS(8.625 Inch O.D.)
Schedule 10, 40, 80, 160, XXH Schedule 5, 10, 40, 80, 120, 160, XXH
1 Inch IPS:(1.315′ O.D.) 10 Inch IPS(10.750 Inch O.D.)
Schedule 5, 10, 40, 80, 160, XXH Schedule 10, 20, 40, 80 (.500), TRUE 80(.500)
Schedule 10, 40, 80, 160, XXH Schedule10(.188), Schedule40(.375)
2 1/2 Inch IPS(2.875 Inch O.D.) 18 Inch IPS (18.000 Inch O.D.)
Schedule 10, 40, 80, 160, XXH Schedule-40 (.375)
3 Inch IPS( 3.500 Inch O.D.)
Schedule 5, 10, 40, 80, 160, XXH

API 5CT L80 13Cr Carbon Steel Line Pipes Dimensions

Size Weight Outside Diameter Wall Thickness End Finish
Grade
in mm in mm J55K55 L80 13Cr N80 C90T95 P110
4 1/2 9.50 4.500 114.3 0.205 5.21 PS – – – –
10.50 0.224 5.69 PSB – – – –
11.60 0.250 6.35 PSLB PLB PLB PLB PLB
13.50 0.290 7.37 – PLB PLB PLB PLB
15.10 0.337 9.56 – – – – PLB
5 11.50 5.00 127.00 0.220 5.59 PS – – – –
13.00 0.253 6.43 PSLB – – – –
15.00 0.296 7.52 PSLB PLB PLB PLBE PLB
18.00 0.362 9.19 – PLB PLB PLBE PLB
21.40 0.437 11.10 – PLB PLB PLB PLB
23.20 0.478 12.14 –     PLB  
24.10 0.500 12.70 –     PLB  
5 1/2 14.00 5.500 139.7 0.244 6.20 PS – – – –
15.50 0.275 6.98 PSLB – – – –
17.00 0.304 7.72 PSLB PLB PLB PLBE PLB
20.00 0.361 9.17 – PLB PLB PLBE PLB
23.00 0.415 10.54 – PLB PLB PLBE PLB
6 5/8 20.00 6.625 168.28 0.288 7.32 PSLB – – – –
24.00 0.352 8.94 PSLB PLB PLB PLBE PLB
28.00 0.417 10.59 – PLB PLB PLBE PLB
32.00 0.475 12.06 – PLB PLB PLBE PLB
7 17.00 7.00 177.80 0.231 5.87 – – – – –
20.00 0.272 6.91 PS – – – –
23.00 0.317 8.05 PSLB PLB PLB PLBE –
26.00 0.362 9.19 PSLB PLB PLB PLBE PLB
29.00 0.408 10.36 – PLB PLB PLBE PLB
32.00 0.453 11.51 – PLB PLB PLBE PLB
35.00 0.498 12.65 – PLB PLB PLBE PLB
38.00 0.540 13.72 – PLB PLB PLBE PLB
7 5/8 24.00 7.625 193.68 0.300 7.62 – – – – –
26.40 0.328 8.33 PSLB PLB PLB PLBE PLB
29.70 0.375 9.52 – PLB PLB PLBE PLB
33.70 0.430 10.92 – PLB PLB PLBE PLB
39.00 0.500 12.70 – PLB PLB PLBE PLB
42.80 0.562 14.27 – PLB PLB PLB PLB
45.30 0.595 15.11 – PLB PLB PLB PLB
47.10 0.625 15.88 – PLB PLB PLB PLB
8 5/8 24.00 8.625 219.08 0.264 6.71 PS – – – –
28.00 0.304 7.72 – – – – –
32.00 0.352 8.94 PSLB – – – –
36.00 0.400 10.16 PSLB PLB PLB PLBE PLB
40.00 0.450 11.43 – PLB PLB PLBE PLB
44.00 0.500 12.70 – PLB PLB PLBE PLB
49.00 0.557 14.15 – PLB PLB PLBE PLB
9 5/8 32.30 9.625 244.48 0.312 7.92 – – – – –
36.00 0.352 8.94 PSLB – – – –
40.00 0.395 10.03 PSLB PLB PLB PLBE –
43.50 0.435 11.05 – PLB PLB PLBE PLB
47.00 0.472 11.99 – PLB PLB PLBE PLB
53.50 0.545 13.84 – PLB PLB PLBE PLB
58.40 0.595 15.11 – PLB PLB PLB PLB
10 3/4 32.75 10.75 273.05 0.279 7.09 – – – – –
40.50 0.350 8.89 PSB – – – –
15.50 0.400 10.16 PSB – – – –
51.00 0.450 11.43 PSB PSB PSB PSBE PSB
55.50 0.495 12.57 – PSB PSB PSBE PSB
60.70 0.545 13.84 – – – PSBE PSB
65.70 0.595 15.11 – – – PSB PSB
13 3/8 48.00 13.375 339.73 0.330 8.38 – – – – –
54.50 0.380 9.65 PSB – – – –
61.00 0.430 10.92 PSB – – – –
68.00 0.480 12.19 PSB PSB PSB PSB PSB
72.00 0.514 13.06 – PSB PSB PSB PSB
16 65.00 16 406.40 0.375 9.53 – – – – –
75.00 0.438 11.13 PSB – – – –
84.00 0.495 12.57 PSB – – – –
109.00 0.656 16.66 P P P – P
18 5/8 87.50 18.625 473.08 0.435 11.05 PSB – – – –
20 94.00 20 508.00 0.438 11.13 PSLB – – – –
106.50 0.500 12.70 PSLB – – – –
133.00 0.635 16.13 PSLB – – – –

Hardness Of API 5CT Gr. L80 13Cr Octg Tubing

Group Grade Type Total elongation under load % Yield strength MPa Tensile strength min. MPa Hardness a max. Specified wall thickness mm Allowable hardness variation b HRC
min. max . 　 HRC HBW
1 2 3 4 5 6 7 8 9 10 11
1 H40 - 0.5 276 552 414 - - - -
J55 - 0.5 379 552 517 - - - -
K55 - 0.5 379 552 655 - - - -
N80 1 0.5 552 758 689 - - - -
N80 Q 0.5 552 758 689 - - - -
R95 - 0.5 655 758 724 - - - -
2 M65 - 0.5 448 586 586 22 235 - -
L80 13Cr 1 0.5 552 655 655 23 241 - -
L80 13Cr 9Cr 0.5 552 655 655 23 241 - -
L80 13Cr 13Cr 0.5 552 655 655 23 241 - -
C90 1 0.5 621 724 689 25.4 255 ≤ 12.70 12.71 to 19.04 19.05 to 25.39 ≥ 25.40 3.0 4.0 5.0 6.0
T95 1 0.5 655 758 724 25.4 255 ≤ 12.70 12.71 to 19.04 19.05 to 25.39 ≥ 25.40 3.0 4.0 5.0 6.0
C110 - 0.7 758 828 793 30 286 ≤ 12.70 12.71 to 19.04 19.05 to 25.39. ≥ 25.40 3.0 4.0 5.0 6.0
3 P110 - 0.6 758 965 862 - - - -
4 Q125 1 0.65 862 1034 931 b - ≤ 12.70 12.71 to 19.04 ≥ 19.05 3.0 4.0 5.0

You need our support, to have any projects?

Get Free Quotes Contact Us

Ready Stock of API 5CT L80 13Cr Pipes & Tubes

  • 5CT Grade L80 13Cr Carbon Steel Pipes
  • API 5CT OCTG Casing Tubing Supplier
  • API 5CT OCTG and Linepipe
  • API 5CT L80 13Cr Pipe
  • API 5CT Casing
  • API 5CT GRADE L80 13Cr Pipes Stockist
  • 5CT Grade L80 13Cr Casing Pipe
  • 13cr-L80 13Cr Tubing Manufacturer
  • 5CT Gr. L80 13Cr Octg Tubing
  • API 5CT OCTG Tubing
  • API 5CT Tubing
  • 5CT Gr. L80 13Cr Tubing
  • API 5CT GRADE L80 13Cr Casing
  • 5CT Grade L80 13Cr Octg Pipe
  • API 5CT GRADE L80 13Cr Tubing
  • API 5CT Octg Pipe
  • API 5ct grade L80 13Cr type 1 ERW OCTG casing and tubing
  • API 5CT Grade L80 13Cr Pipes

  • API 5CT Casing and Tubing Stockholder
  • API 5CT Grade L80 13Cr 13CR Casing Steel Pipe Exporter
  • API 5ct n80 L80 13Cr p110 seamless steel pipe
  • Global exporter of API L80 13Cr Pipe
  • API 5CT Pipe
  • 9 5/8 Inch API 5ct n80 L80 13Cr seamless steel
  • API 5CT L80 13Cr Seamless Pipe
  • Global exporter of API 5L PSL 2 Pipes Manufacturer
  • L80 13Cr Tubing
  • API 5CT L-80 13Cr Casing Pipe
  • 3/8 inch API 5CT N80 L80 13Cr steel Casing pipe
  • API 5CT L80 13Cr Carbon Steel Line Pipes
  • API 5ct N80 L80 13Cr p110 carbon steel pipe
  • Carbon Steel API 5CT Pipe Ready Stock
  • L80 13Cr Pipe
  • API 5CT Grade L80 13Cr Type 1 Casing And Tubing
  • L80 13Cr Casing
  • API 5ct L80 13Cr tubing oilfield steel pipe

API 5CT GR.L80 13Cr Pipe Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%