Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Hastelloy C276 Forged Fittings

  • Home
  • Hastelloy Forged Fittings

Hastelloy C276 Full Couplings, Manufacturer of ASTM B564 Alloy C276 Cross, High Quality Hastelloy C276 Forged Fittings, Ready Stock Of Nickel Alloy C276 Forged Steel Fittings, C276 Hastelloy High Pressure Forged Fittings Supplier in Mumbai.

Unifit Metal Alloys is a recognisedtrader and distributor of Hastelloy Alloy C276 Forged Fittings, which may be welded using standard fusion and resistance procedures. Hastelloy UNS N10276 Threaded Tee Fittings is alloyed by means of having columbium-tantalum (referred to as niobium) and has high-temperature mechanical characteristics. In the annealed state, it is virtually non-magnetic and can only be toughened by cold working.It is resistant to oxidation and corrosion and has high creep strength. It has greater carbon content and has better high temperature and creep qualities. It may be annealed and quenched in water at temperatures ranging from 1010 Degree C to 1193 Degree C. It is another steel of the precipitation-hardened steels metal class.

Nickel Alloy C276 Forged Fittings, ANSI B16.9 Alloy C276 Forged Union, UNS N10276 Equal Tee, Hastelloy® Alloy C276 90 Deg Screwed Threaded Elbow, Hastelloy C276 Reducer, C276 Hastelloy Alloy 3000 LB Forged Screwed Fittings, Grade C276 Hastelloy Threaded Plug, DIN 2.4819 Union Manufacturer In Mumbai, India.

While it needs more beginning pressures than other alloys, Hastelloy WNR 2.4819 Socket Weld Cross Fittings is fairly resistant and ductile and can be stamped, blanked, spun, and pulled with ease. To prevent strong deformation, shrinking, or flaking tack welds, they must be fastened with substantially shorter intervals between them (much less than those of non-alloyed steels).It is frequently used in high-temperature gaskets, chemical production equipment, rocket engine components, aircraft collector rings, expansion joints; exhaust manifolds, and other applications.Oxyacetylene welding is not recommended for this steel because modest rates and consistent positive feeds reduce the alloy's ability to work hardens.

This steel's properties may be better suited for locations where stability is a main issue. Nickel Alloy C276 Threaded Cross Fittings is employed in fired heater tubes, recuperate tube sheets, reactor equipment, and so on. It is not heat hard enable and can only be hardened by cold working. These stabilised grades have been replaced for applications requiring just welding or short-term heating.It has just 30 percent of the thermal conductivity of non-alloyed steels, but its fusion point is lower, hence austenitic steels must be welded with less heat input than non-alloyed steels. It is also utilized in oil refineries, fluid catalytic cracking units (FCC), guns production, hanger rods, recuperator tube shells, sheets and supports, to name a few applications.

Hastelloy C276 Forged Fittings

Get a best quote for Hastelloy C276 Forged Fittings, We Keep Bulk Stock of Hastelloy Alloy C276 Socket Weld Tee Fittings at our stockyard, contact us to request a quote.

Hastelloy C276 Forged Fittings Specifications

Standards ASTM B564 / ASME SB564
Specifications ASME B16.11, MSS SP-79, 83, 95, 97, BS 3799
Size Range NPS 1/8″- 4″ (DN 6~100)
Rating Pressure Threaded End - 2000/3000/6000 LBS.
Socket weld End – 3000/6000/9000 LBS.
Type Socket Weld, Screwed, BSP Threaded & NPT Threaded

Hastelloy Alloy C276 Forged Fittings Equivalent Grades

STANDARDUNS WERKSTOFF NR.AFNORENJISBSGOST
Hastelloy C276N102762.4819-NiMo16Cr15WNW 0276-ХН65МВУ

Hastelloy C276 Threaded Forged Fittings Chemical Composition

GradeCMnSiCoSNiCrFeMoWVP
Hastelloy C2760.010 max1.0 max0.08 max2.5 max0.03 max Bal14.5 – 16.54 – 715 – 173 – 4.50.35 max0.04 max

C276 Hastelloy Alloy Forged Socket Weld Fittings Mechanical Properties

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Hastelloy C2768.89 g/cm31370 °C (2500 °F)Psi – 1,15,000 , MPa – 790Psi – 52,000 , MPa – 35540 %

Various Types Of Hastelloy C276 Forged Fittings

Hastelloy C276 Forged 90 Degree Elbow

Hastelloy C276 Forged 90 Degree Elbow

UNS N10276 Forged 90 Degree Elbow DIN 2.4819 Forged 90 Degree Elbow Hastelloy Alloy C276 Forged 90 Degree Elbow ANSI B16.9 Alloy C276 Degree Elbow
Hastelloy Alloy C276 Forged Socket Weld Tee

Hastelloy Alloy C276 Forged Socket Weld Tee

UNS N10276 Forged Socket Weld Tee Alloy C276 Forged Socket Weld Tee DIN 2.4819 Forged Socket Weld Tee ANSI B16.9 C276 Hastelloy Forged Socket Weld Tee
Hastelloy C276 Forged 45 Degree Elbow

Hastelloy C276 Forged 45 Degree Elbow

DIN 2.4819 Forged 45 Degree Elbow ANSI B16.9 Alloy C276 Forged 45 Degree Elbow UNS N10276 Forged 45 Degree Elbow Nickel Alloy C276 Forged 45 Degree Elbow
Hastelloy Alloy C276 Forged Socket Weld Cross

Hastelloy Alloy C276 Forged Socket Weld Cross

ANSI B16.9 Nickel Alloy C276 Forged Socket Weld Cross DIN 2.4819 Forged Socket Weld Cross High Quality Hastelloy C276 Forged Socket Weld Cross UNS N10276 Forged Socket Weld Cross
Hastelloy C276 Threaded / Screwed Hex Plug

Hastelloy C276 Threaded / Screwed Hex Plug

C276 Hastelloy Alloy C276 Threaded / Screwed Hex Plug UNS N10276 Threaded / Screwed Hex Plug ANSI B16.9 Alloy C276 Threaded / Screwed Hex Plug DIN 2.4819 Threaded / Screwed Hex Plug
Hastelloy Alloy C276 Threaded / Screwed Unionp

Hastelloy Alloy C276 Threaded / Screwed Union

UNS N10276 Threaded / Screwed Union DIN 2.4819 Threaded / Screwed Union Grade C276 Hastelloy Threaded / Screwed Union ANSI B16.9 Hastelloy C276 Threaded / Screwed Union
Hastelloy C276 Threaded / Screwed Street Elbow

Hastelloy C276 Threaded / Screwed Street Elbow

Hastelloy Alloy C276 Threaded / Screwed Street Elbow UNS N10276 Threaded / Screwed Street Elbow ANSI B16.9 Alloy C276 Threaded / Screwed Street Elbow DIN 2.4819 Threaded / Screwed Street Elbow
Hastelloy Alloy C276 Forged Socket Weld Half Coupling

Hastelloy Alloy C276 Forged Socket Weld Half Coupling

Hastelloy® Alloy C276 Forged Socket Weld Half Coupling UNS N10276 Forged Socket Weld Half Coupling ANSI B16.9 Hastelloy JIS NW 0276 Forged Socket Weld Half Coupling DIN 2.4819 Forged Socket Weld Half Coupling

Hastelloy Alloy C276 Forged Fittings Size Range & Dimensions

DN-NPT MAJOR DIAMETER MM TAPPING /DRILL SIZE MM TPI PITCH MM
1/16″ 7.895 6.00 27 0.941
1/8″ 10.242 8.25 27 0.941
1/4″ 13.616 10.70 18 1.411
3/8″ 17.055 14.10 18 1.411
1/2″ 21.223 17.40 14 1.814
3/4″ 26.568 22.60 14 1.814
1″ 33.228 28.50 11.5 2.209
1¼” 41.985 37.00 11.5 2.209
1½” 48.054 43.50 11.5 2.209
2″ 60.092 55.00 11.5 2.209
2½” 72.699 65.50 8 3.175
3″ 88.608 81.50 8 3.175
3½” 101.316 94.30 8 3.175
4″ 113.973 107.00 8 3.175
5″ 141.300 134.384 8 3.175
6″ 168.275 161.191 8 3.175
8″ 219.075 211.673 8 3.175
10″ 273.050 265.311 8 3.175
12″ 323.850 315.793 8 3.175

Hastelloy C276 Forged Fittings Class, Size & Wall Thickness

Description Class Designation
3000 6000 9000
Elbows 45 and 90 degrees,
Tees, Crosses, Couplings,
Half-Couplings,
End or Pipe Caps
1/2 – 4 1/2 – 2 1/2 – 2
1/2 – 4 1/2 – 2 1/2 – 2
1/2 – 4 1/2 – 2 1/2 – 2
Pipe Size
by Wall Thickness
SCH 80 / XS SCH 160 XXS

You need our support, to have any projects?

Ready Stock of Hastelloy Alloy C276 Forged Fittings

  • Hastelloy EN NiMo16Cr15W Pipe End Cap
  • Alloy C276 Forged Fittings
  • Hastelloy® Alloy C276 90deg. LR Elbow
  • WERKSTOFF NR. 2.4819 Forged Fittings
  • Hastelloy C276 High Pressure Forged Fittings
  • Alloy N10276 Class 6000 Fittings
  • Hastelloy JIS NW 0276 Forged Union
  • ANSI B16.9 Hastelloy C276 Forged Tee Stockholder
  • Hastelloy Alloy Pipe Nipple
  • ASTM B564 Hastelloy C276 Union
  • Hastelloy UNS N10276 Hex Plug
  • Grade C276 Hastelloy Forged Fittings
  • C276 Alloy Threaded Plug Stockist
  • High Quality Hastelloy C276 Equal Tee
  • C276 Hastelloy Alloy 45deg. Elbow
  • ASME SB564 Alloy C276 Cross
  • Hastelloy DIN 2.4819 Swage Nipple
  • ASTM B564 Alloy C276 Bushing
  • Hastelloy Alloy C276 Forged Steel Fittings
  • C276 Hastelloy Full Couplings Supplier
  • Hastelloy C-22 Equal & Unequal Cross Leading
  • Nickel Alloy C276 3000 LB Forged Screwed Fittings
  • Hastelloy® Alloy C276 90 Deg Screwed Threaded Elbow

  • Grade C276 Hastelloy Street Elbow Exporter
  • Hastelloy DIN 2.4819 Threaded 90° Outlet Elbow
  • UNS N10276 Full Couplings
  • Hastelloy® Alloy C276 Forged Elbows
  • C276 Hastelloy Alloy Forged Fitting Manufacturer
  • ASTM B564 Hastelloy C276 Forged Cross
  • Hastelloy EN NiMo16Cr15W Reducing Tee
  • ANSI B16.9 Hastelloy C276 LB Forged Screwed Fittings
  • C276 Alloy Threaded Plug Stockholder
  • Alloy N10276 Screwed Cap Manufacturer
  • Nickel Alloy C276 Full Couplings
  • Hastelloy® Alloy C276 Forged Fittings
  • C276 Hastelloy Screwed Hex Plug
  • Hastelloy JIS NW 0276 90 Deg Screwed Threaded Elbow
  • Grade C276 Hastelloy Forged Socket Weld Hex Nipple
  • ASME SB564 Hastelloy C276 Socket Weld Adapters
  • Nickel Alloy C276 Threaded Bull Plug
  • Alloy C276 Forged Pipe Fitting
  • ASME B16.9 C276 Hastelloy Alloy Threaded Unequal Tee
  • C276 Hastelloy Socket Weld Boss
  • ANSI B16.9 Alloy C276 Hex Nipples
  • C276 Hastelloy Alloy Threaded Tee Distributor
  • Hastelloy® Alloy C276 Square Plug

C276 Hastelloy Forged Fitting Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%