Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Alloy Steel A234 WP22 Pipe Fittings

  • Home
  • Alloy Steel Pipe Fittings

Manufacturer of ASTM A234 CrMo WP22 Pipe Elbow, WP22 CrMo LR Elbow, Ready Stock Of Gr WP22 Alloy Steel Pipe Fittings, WP22 Alloy Steel Buttweld Fittings, Alloy Steel A234 WP22 Elbow Supplier in Mumbai.

Unifit Metal Alloys is an acknowledged trader and stockist of AS A234 WP22 Pipe Fittings, which is unaffected by thermal treatment.

Alloy Steel ASTM A234 WP22 Butt Weld Reducer Pipe Fittings are found in evaporators, dairy equipment, flexible metal tubing, hypodermic needles, food processing equipment, nuclear vessels, and other applications. They are also utilised in refrigeration equipment, oil well filter screens, the paper industry, and sanitary fittings, among other things. It is commonly found in pressure tanks, valves, spinning, still tubes, shipping drums, textile dyeing equipment, tubing, and other applications. They are available in a variety of widths, surface finishes, thicknesses, and lengths to meet the varying needs of various industries. Because of its greater carbon concentration, this steel is used at high temperatures.

Gr WP22 Alloy Steel Pipe Fittings, Alloy Steel A234 WP22 Short Radius Elbow, Alloy Steel WP22 90 Degree Elbow, Cr-Mo A234 WP22 Stub End, CrMo WP22 Buttweld Fittings, ANSI B16.9 WP22 CrMo Welded Fittings, WP22 Alloy Steel Reducer, WP22 Alloy Steel Pipe Cap Manufacturer In Mumbai, India.

Meanwhile, ASTM A234 Alloy Steel WP22 Butt Weld Cross Pipe Fittings are securely validated and tested by quality controllers to ensure that they provide our appreciated clients with the highest strength, performance, and category attributes. They are a modification with a regulated carbon content in the range of 0.04 to 0.10 for enhanced strength at temperatures above around 800 degrees Fahrenheit. They are utilised in a variety of applications, including furnace parts, oil burner parts, heat exchangers, combustion tubes, and so on. It's also utilised in weld filler wire and electrodes, annealing covers, fire box sheets, and other applications. Chemical processing, oil and gas, and other industries mostly use these items.

ASME SA 234 Alloy Steel WP22 Butt Weld Stub Ends Pipe Fittings outperform in terms of both strength and corrosion resistance. It has a high strength and oxidation resistance in continuous service temperatures up to 2000 degrees Fahrenheit (1093 Degree C). Because it is entirely austenite at ambient temperature, it cannot be toughened by heat treatment. It possesses greater tensile and yield strengths that may be attained by cold working rather than complete annealing. They are not stable at greater temps, which is where these metals are used. When annealed, they are basically nonmagnetic and become faintly magnetic when cold worked. Please approach us with your needs for this steel, and we will provide you with our most competitive pricing.

Alloy Steel A234 WP22 Pipe Fittings

Get a best quote for Alloy Steel A234 WP22 Seamless Fittings, We Keep Bulk Stock of Cr-Mo A234 WP22 Buttweld Pipe Fittings at our stockyard, contact us to request a quote.

Alloy Steel A234 WP22 Pipe Fittings Specifications

Specifications ASTM A234 / ASME SA234
Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size Seamless Fittings: 1/2" - 10"
Welded Fittings: 1/2" - 48"
Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Manufacturing Standards ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200
BS : BS4504, BS4504, BS1560, BS10
JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316
GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380
EN: EN10253-1, EN10253-2
Types Seamless / ERW / Welded / Fabricated
Connection Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Elbow Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process Push, Press, Forge, Cast, etc.
Specialized manufacturer of 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Alloy Steel A234 WP22 Butt weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
A234 WP22 0.05-0.15 0.3-0.6 ≤0.5 ≤0.04 ≤0.04 2-2.5 0.87-1.13

Alloy Steel A234 WP22 Pipe Fittings Mechanical Properties

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
A234 WP22 415-585 205 20

Various Types Of Alloy Steel A234 WP22 Pipe Fittings

Alloy Steel A234 WP22 Elbow

Alloy Steel A234 WP22 Elbow

ANSI B16.9 CrMo WP22 Buttweld Elbow Gr WP22 Alloy Steel Pipe Elbow Alloy Steel A234 WP22 45 Degree Pipe Elbow Alloy Steel WP22 90 Degree Elbow
Alloy Steel A234 WP22 Reducer

Alloy Steel A234 WP22 Reducer

Alloy Steel WP22 Butt weld Concentric Reducer Cr-Mo A234 WP22 Reducers ANSI B16.9 WP22 CrMo Buttweld Reducers ASTM A234 CrMo WP22 Butt weld Eccentric Reducer
Alloy Steel A234 WP22 Tee

Alloy Steel A234 WP22 Tees

ASME SA234 Alloy Steel WP22 Reducing Tees ANSI B16.9 WP22 Alloy Steel Buttweld Tees Alloy Steel A234 WP22 Buttweld Equal Tee WP22 CrMo Butt weld Unequal Tee
Alloy Steel A234 WP22 Cross

Alloy Steel A234 WP22 Cross

ANSI B16.9 CrMo WP22 Buttweld Cross Alloy Steel A234 WP22 Buttweld Pipe Cross Chrome Moly Gr WP22 Reducing Cross Chrome Moly WP22 Equal Cross
Alloy Steel A234 WP22 Stub End

Alloy Steel A234 WP22 Stub End

Alloy Steel A234 WP22 Short Stub End ANSI B16.9 Grade WP22 Alloy Buttweld Stub End CrMo Grade WP22 Long Stub End High Quality WP22 Alloy Steel Lap Joint Stub End
Alloy Steel A234 WP22 Pipe Cap

Alloy Steel A234 WP22 Pipe Cap

Alloy Steel WP22 Buttweld Cap Alloy Steel A234 WP22 End Cap ANSI B16.9 Cr-Mo A234 WP22 Buttweld Pipe Cap Chrome Moly Gr WP22 Buttweld Pipe Cap
Alloy Steel A234 WP22 Bend

Alloy Steel A234 WP22 Bend

ANSI B16.9 Alloy Steel A234 WP22 Buttweld Bend Alloy Steel A234 WP22 Hot Induction Bend Gr WP22 Alloy Steel Long Radius Bend WP22 CrMo Piggable Bend
Alloy Steel A234 WP22 Nipple

Alloy Steel A234 WP22 Nipple

Cr-Mo A234 WP22 Barrel Nipple ANSI B16.9 Alloy Steel WP22 Buttweld Nipple Gr WP22 Alloy Steel Pipe Nipple Alloy Steel A234 WP22 Butt weld Swage Nipple

Alloy Steel A234 WP22 Pipe Fittings Thickness Chart

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
90° Elbow 45° Elbow Equal tee 90° Elbow 45° Elbow Equal tee 90° Elbow 45° Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91
Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee
40x.25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50x25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50x40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x.50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100x50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100x80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150x80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150x100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200x100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200x150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31

You need our support, to have any projects?

Ready Stock of Alloy Steel A234 WP22 Pipe Fittings

  • Alloy Steel WP22 SR Elbow
  • High Quality WP22 Alloy Steel 1D Elbow
  • Alloy Steel WP22 Pipe Fittings
  • Gr WP22 Alloy Steel Long Radius Bend
  • ASTM A234 CrMo WP22 Buttweld Fittings
  • ASME SA234 Alloy Steel WP22 45 Degree Elbow
  • WP22 Alloy Steel Elbow
  • Alloy Steel WP22 90° Short Radius Elbow
  • Cr-Mo A234 WP22 Pipe Elbow
  • Gr WP22 Alloy Steel Lap Joint Stub End
  • WP22 CrMo LR Elbow Stockist
  • Alloy Steel A234 WP22 Barrel Nipple Supplier
  • Alloy Steel A234 WP22 Long Stub End
  • ANSI B16.9 Chrome Moly WP22 Pipe Cap
  • ASME SA234 WP22 CrMo Lateral Tee
  • CrMo Grade WP22 Equal Cross
  • Gr WP22 Alloy Steel Piggable Bends
  • WP22 Alloy Steel Eccentric Reducer
  • Chrome Moly Gr WP22 180° LR Return Bends
  • Grade WP22 Alloy Butt weld Fittings
  • Chrome Moly WP22 Seamless Fittings
  • CrMo WP22 Long Radius Elbow
  • Chrome Moly Gr WP22 Long Stub End

  • ANSI B16.9 Alloy Steel A234 WP22 Elbow
  • ANSI B16.9 WP22 CrMo Short Stub End
  • ASME SA234 Alloy Steel WP22 Stub End Stockholder
  • High Quality WP22 Alloy Steel End Cap Distributor
  • WP22 Alloy Steel Two Halve Butt weld Fittings
  • Alloy Steel WP22 Pipe Fittings
  • Cr-Mo A234 WP22 Mandrel Pipe Bend
  • Alloy Steel A234 WP22 Pipe Fittings
  • CrMo Grade WP22 Eccentric Reducer Manufacturer
  • Alloy Steel A234 WP22 Swage Nipple
  • Chrome Moly WP22 Elbow Exporter
  • ASTM A234 WP22 CrMo Pipe Fittings
  • Chrome Moly Gr WP Buttweld Fittings
  • WP22 Alloy Steel Reducing Nipple
  • WP22 Chrome Moly Butt Weld Pipe Fittings
  • WP22 CrMo Pipe Fittings Manufacturer
  • Gr WP22 Alloy Steel Butt weld Tee
  • CrMo WP22 Reducer
  • Chrome Moly Gr WP22 90° Short Radius Elbow
  • Alloy Steel WP22 Pipe Bend
  • Grade WP22 Alloy Welded Fittings
  • ASME B16.9 CrMo WP22 Buttweld Fittings
  • Alloy Steel A234 WP22 Two Joint Pipe Fittings

Alloy Steel A234 WP22 Buttweld Fittings Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%