Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Alloy Steel A234 WP91 Pipe Fittings

  • Home
  • Alloy Steel Pipe Fittings

Manufacturer of ASTM A234 CrMo WP91 Pipe Elbow, WP91 CrMo LR Elbow, Ready Stock Of Gr WP91 Alloy Steel Pipe Fittings, WP91 Alloy Steel Buttweld Fittings, Alloy Steel A234 WP91 Elbow Supplier in Mumbai.

Unifit Metal Alloys is an acknowledged distributor and manufacturer of AS A234 WP91 Pipe Fittings, which are available in a variety of classes, sizes, and forms.

Its increased carbon concentration improves the material's heat resistance, tensile yield strength, and short and long term creep strength. Alloy Steel ASTM A234 WP91 Butt Weld End Caps Pipe Fittings is a cost-effective and flexible corrosion-resistant alloy that can be used in a variety of general-purpose uses. This steel's chemical composition, mechanical properties, weldability, and corrosion / oxidation resistance provide the best all-around performance at a low cost. This is one of the most well-known and widely used alloys in the stainless steel family, and it is used in a broad range of domestic and commercial uses.

Gr WP91 Alloy Steel Pipe Fittings, Alloy Steel A234 WP91 Short Radius Elbow, Alloy Steel WP91 90 Degree Elbow, Cr-Mo A234 WP91 Stub End, CrMo WP91 Buttweld Fittings, ANSI B16.9 WP91 CrMo Welded Fittings, WP91 Alloy Steel Reducer, WP91 Alloy Steel Pipe Cap Manufacturer In Mumbai, India.

We focus our efforts on providing and producing these ASTM A234 Alloy Steel WP91 Elbow Pipe Fittings in both standard and non-standard sizes. They have an exceptionally superior formability and can be welded in the process of good grace by all standard methods. Tanks and receptacles for a wide range of liquids and solids are common uses for this alloy. They were constructed in such a way as to achieve novel high spots on the industrial façade. They are used for a variety of various industrial reasons, as well as to connect pipes for the most part. It is available in custom lengths and can be manufactured and machined to suit our customers' pipeline requirements.

As a consequence, ASME SA 234 Alloy Steel WP91 2D Elbow Pipe Fittings is a sought-after substance for use in extremely corrosive environments. It is a variation with a smaller carbon concentration that enhances weldability and reduces the danger of decreased corrosion protection around the weld. It has a slightly reduced yield and tensile strength as well. These items have the following typical applications: Moisture separator reheaters, feedwater pipelines, stator rods, heat exchangers, and other components are available. These products are primarily used in industries such as nuclear and electricity, general engineering, and so on. They are used in the manufacturing, civil construction, automobile, and decoration industries.

Alloy Steel A234 WP91 Pipe Fittings

Get a best quote for Alloy Steel A234 WP91 Seamless Fittings, We Keep Bulk Stock of Cr-Mo A234 WP91 Buttweld Pipe Fittings at our stockyard, contact us to request a quote.

Alloy Steel A234 WP91 Pipe Fittings Specifications

Specifications ASTM A234 / ASME SA234
Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size Seamless Fittings: 1/2" - 10"
Welded Fittings: 1/2" - 48"
Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Manufacturing Standards ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200
BS : BS4504, BS4504, BS1560, BS10
JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316
GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380
EN: EN10253-1, EN10253-2
Types Seamless / ERW / Welded / Fabricated
Connection Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Elbow Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process Push, Press, Forge, Cast, etc.
Specialized manufacturer of 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Alloy Steel A234 WP91 Butt weld Fittings Chemical Composition

Grade C Mn Si S P Cr Mo
A234 WP91 0.05-0.15 0.3-0.6 ≤0.5 ≤0.04 ≤0.04 2-2.5 0.87-1.13

Alloy Steel A234 WP91 Pipe Fittings Mechanical Properties

Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
A234 WP91 415-585 205 20

Various Types Of Alloy Steel A234 WP91 Pipe Fittings

Alloy Steel A234 WP91 Elbow

Alloy Steel A234 WP91 Elbow

Alloy Steel A234 WP91 45 Degree Pipe Elbow ANSI B16.9 CrMo WP91 Buttweld Elbow Alloy Steel WP91 90 Degree Elbow Gr WP91 Alloy Steel Pipe Elbow
Alloy Steel A234 WP91 Reducer

Alloy Steel A234 WP91 Reducer

ASTM A234 CrMo WP91 Butt weld Eccentric Reducer Alloy Steel WP91 Butt weld Concentric Reducer Cr-Mo A234 WP91 Reducers ANSI B16.9 WP91 CrMo Buttweld Reducers
Alloy Steel A234 WP91 Tee

Alloy Steel A234 WP91 Tees

WP91 CrMo Butt weld Unequal Tee ANSI B16.9 WP91 Alloy Steel Buttweld Tees Alloy Steel A234 WP91 Buttweld Equal Tee ASME SA234 Alloy Steel WP91 Reducing Tees
Alloy Steel A234 WP91 Cross

Alloy Steel A234 WP91 Cross

Alloy Steel A234 WP91 Buttweld Pipe Cross Chrome Moly WP91 Equal Cross ANSI B16.9 CrMo WP91 Buttweld Cross Chrome Moly Gr WP91 Reducing Cross
Alloy Steel A234 WP91 Stub End

Alloy Steel A234 WP91 Stub End

High Quality WP91 Alloy Steel Lap Joint Stub End Alloy Steel A234 WP91 Short Stub End CrMo Grade WP91 Long Stub End ANSI B16.9 Grade WP91 Alloy Buttweld Stub End
Alloy Steel A234 WP91 Pipe Cap

Alloy Steel A234 WP91 Pipe Cap

Alloy Steel WP91 Buttweld Cap Alloy Steel A234 WP91 End Cap Chrome Moly Gr WP91 Buttweld Pipe Cap ANSI B16.9 Cr-Mo A234 WP91 Buttweld Pipe Cap
Alloy Steel A234 WP91 Bend

Alloy Steel A234 WP91 Bend

Gr WP91 Alloy Steel Long Radius Bend WP91 CrMo Piggable Bend ANSI B16.9 Alloy Steel A234 WP91 Buttweld Bend Alloy Steel A234 WP91 Hot Induction Bend
Alloy Steel A234 WP91 Nipple

Alloy Steel A234 WP91 Nipple

ANSI B16.9 Alloy Steel WP91 Buttweld Nipple Alloy Steel A234 WP91 Butt weld Swage Nipple Cr-Mo A234 WP91 Barrel Nipple Gr WP91 Alloy Steel Pipe Nipple

Alloy Steel A234 WP91 Pipe Fittings Thickness Chart

Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
90° Elbow 45° Elbow Equal tee 90° Elbow 45° Elbow Equal tee 90° Elbow 45° Elbow Equal tee
8 0.02 0.01 0.03 0.03 0.02 0.06 0.04 0.03 0.07
10 0.03 0.02 0.05 0.03 0.02 0.03 0.06 0.04 0.09
15 0.06 0.03 0.09 0.08 0.04 0.10 0.10 0.05 0.14
20 0.07 0.03 0.13 0.08 0.04 0.17 0.11 0.05 0.20
25 0.14 0.08 0.28 0.15 0.11 0.29 0.22 0.14 0.38
32 0.23 0.11 0.49 0.26 0.17 0.59 0.40 0.23 0.68
40 0.30 0.17 0.68 0.40 0.23 0.86 0.51 0.29 1.02
50 0.50 0.25 0.85 0.70 0.4 1.28 0.91 0.59 1.59
65 0.85 0.48 1.41 1.40 0.77 2.19 1.81 0.99 3.13
80 1.25 0.63 1.77 2.20 1.08 3.31 2.97 1.50 4.45
90 1.70 0.75 2.67 2.83 1.42 4.08 4.00 2.00 5.44
100 2.10 1.08 3.46 4.47 2.09 5.27 6.18 2.81 7.71
150 5.45 2.72 8.07 10.89 5.44 10.99 16.32 8.16 13.61
200 10.20 5.33 15.65 21.54 10.77 20.91 33.11 16.56 28.12
250 18.15 9.75 26.46 38.56 19.27 35.38 51.71 25.86 49.90
300 25.80 13.62 39.46 59.42 29.71 62.14 79.38 39.69 83.91
Product range and theoretical weights (kg)
DN Schedule 10S Schedule 40S Schedule 80S
Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee Con reducer Ecc reducer Reducing tee
40x.25 0.19 0.19 0.60 0.26 0.26 0.76 0.34 0.34 0.90
50x25 0.28 0.28 0.73 0.40 0.40 1.10 0.54 0.54 1.37
50x40 0.31 0.31 0.76 0.45 0.45 1.15 0.59 0.59 1.43
80x.50 0.55 0.55 1.56 1.00 1.00 2.91 1.79 1.79 3.91
100x50 0.78 0.78 2.94 1.50 1.50 4.48 1.95 1.95 6.55
100x80 0.87 0.87 3.04 1.74 1.74 4.64 2.33 2.33 6.79
150x80 1.82 1.82 6.86 3.95 3.95 9.68 5.51 5.51 11.57
150x100 1.96 1.96 7.10 4.07 4.07 11.94 5.96 5.96 11.97
200x100 3.01 3.01 13.46 6.55 6.55 17.98 9.23 9.23 24.18
200x150 3.19 3.19 14.08 6.74 6.74 18.82 10.12 10.12 25.31

You need our support, to have any projects?

Ready Stock of Alloy Steel A234 WP91 Pipe Fittings

  • Alloy Steel A234 WP91 Barrel Nipple Supplier
  • Gr WP91 Alloy Steel Long Radius Bend
  • ASME SA234 Alloy Steel WP91 45 Degree Elbow
  • Alloy Steel WP91 Pipe Fittings
  • Grade WP91 Alloy Butt weld Fittings
  • Alloy Steel A234 WP91 Long Stub End
  • High Quality WP91 Alloy Steel 1D Elbow
  • Gr WP91 Alloy Steel Piggable Bends
  • WP91 Alloy Steel Eccentric Reducer
  • ASTM A234 CrMo WP91 Buttweld Fittings
  • Gr WP91 Alloy Steel Lap Joint Stub End
  • Chrome Moly Gr WP91 180° LR Return Bends
  • WP91 Alloy Steel Elbow
  • Alloy Steel WP91 SR Elbow
  • CrMo WP91 Long Radius Elbow
  • ANSI B16.9 Chrome Moly WP91 Pipe Cap
  • Cr-Mo A234 WP91 Pipe Elbow
  • WP91 CrMo LR Elbow Stockist
  • ASME SA234 WP91 CrMo Lateral Tee
  • CrMo Grade WP91 Equal Cross
  • Chrome Moly Gr WP91 Long Stub End
  • Chrome Moly WP91 Seamless Fittings
  • Alloy Steel WP91 90° Short Radius Elbow

  • ASME SA234 Alloy Steel WP91 Stub End Stockholder
  • ANSI B16.9 Alloy Steel A234 WP91 Elbow
  • High Quality WP91 Alloy Steel End Cap Distributor
  • Gr WP91 Alloy Steel Butt weld Tee
  • Alloy Steel A234 WP91 Pipe Fittings
  • CrMo Grade WP91 Eccentric Reducer Manufacturer
  • Alloy Steel A234 WP91 Swage Nipple
  • Chrome Moly WP91 Elbow Exporter
  • Cr-Mo A234 WP91 Mandrel Pipe Bend
  • Alloy Steel A234 WP91 Two Joint Pipe Fittings
  • Chrome Moly Gr WP Buttweld Fittings
  • WP91 Alloy Steel Reducing Nipple
  • CrMo WP91 Reducer
  • Alloy Steel WP91 Pipe Fittings
  • WP91 Chrome Moly Butt Weld Pipe Fittings
  • Chrome Moly Gr WP91 90° Short Radius Elbow
  • ASME B16.9 CrMo WP91 Buttweld Fittings
  • ANSI B16.9 WP91 CrMo Short Stub End
  • WP91 Alloy Steel Two Halve Butt weld Fittings
  • ASTM A234 WP91 CrMo Pipe Fittings
  • WP91 CrMo Pipe Fittings Manufacturer
  • Grade WP91 Alloy Welded Fittings
  • Alloy Steel WP91 Pipe Bend

Alloy Steel A234 WP91 Buttweld Fittings Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%