EN1092-1 SORF Flanges, Inconel SORF Flange, Stainless Steel Slip On Flanges, ANSI B16.5 Class 150 Slip-On Flanges Supplier in Mumbai.
Unifit Metal Alloys is a distinguished supplier of Slip On Pipe Flanges, whichhas a modest to strong corrosion protection. Boiler barriers, furnace parts, tube bases, oil burner components, kiln linings, glass melds, annealing cases, and industrial mufflers are also made of Inconel Alloy Slip On Flanges. They are also resistant to oil-ash rust as well as molten copper, lead, and tin. This material has been used in furnace components, kiln linings, and heating frames.For heavier building components, the preheating and inter-pass temperatures of this steel should be kept between 200 and 300 degrees Celsius. It is extensively used as furnace components and boiler baffles due to its exceptional oxidation protection at high temps. It is the only heat-resistant metal capable of withstanding liquid copper and brass.
Nickel Alloy Slip On Plate Flanges, Inconel Flat Faced Slip On Flanges Manufacturer In Mumbai, India.
However, where the nitrogen inclusion is for grain refinement, Monel Alloy Slip On Flanges do not have excellent high-temperature resilience. It is machinable at moderate rates with positive feeds, solid supports, and sharp tooling surfaces. Positive feeds andslow speeds, coupled by means of having rigid mounts and high-pitched tooling surfaces;exploit machining of this superior steel in company of corrosion resistance. This steel is used in chemical plants, oil refineries, petrochemical plants, bleaching containers for the paper industry, combustion gas desulfurization plants, marine water, sulphuric and phosphoric acid applications, and so on.
Hastelloy Alloy Slip On Flanges is super austenitic steel with intermediate to high corrosion protection in a variety of industrial conditions. Because of its hardenability, it has restricted weld ability. Cutlery is a popular application for these heat treated steels. Because this product should not be formed below 1650 degrees Fahrenheit, large forgings should be furnace chilled or cooled in dry lime (900 Degree C). It has bad weld ability in general because its thermal conductivity is enhanced and thermal expansion is reduced when compared to austenitic grades. They will be more challenging in the hardened and tempered as provided state due to the high yield strength that must be considered. They are resistant to corrosion caused by oxygen, water, and some substances.
Get a best quote for SS SORF Flanges, We Keep Bulk Stock of Raised Face Slip On Flanges at our stockyard, contact us to request a quote.
Slip On Flanges Specifications
| Specifications | |
|---|---|
| Size Chart | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS10, EN-1092, DIN, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, MSS SP44, ISO7005-1, JIS B2220, API605, API7S, EN1092. |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| DIN | PN6, PN10, PN16, PN25, PN40, PN64 |
| JIS | 5K, 10K, 16K, 20K, 30K, 40K, 63K |
| UNI | 6Bar, 10Bar, 16Bar, 25Bar, 40Bar |
| EN | 6Bar, 10Bar, 16Bar, 25Bar, 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold & Hot Dip Galvanized |
| Most Common Types | Forged, Threaded, Screwed, Plate |
| Test Certificates |
EN 10204/3.1B Raw Material Certificate 100% Radiography Test Report Third Party Inspection Report |
| Production Technique | Forged, Heat Treated & Machined |
| Connect Type / Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap Joint Face (LJF), Small Male-Female (SMF), Tongue & Groove. |
| Special Design |
As per your drawing. AS, ANSI, BS, DIN & JIS. 15 NB (1/2″) to 200 NB (8″). Equal & Reducing Configurations. |
| Test | Direct Reading Spectrograph, Hydrostatic Testing Machine, X-ray Detector, Ultrasonic Flaw Detector, Magnetic Particle Detector. |
| Equipment | Press Machine, Bending Machine, Pushing Machine, Electric Bevelling Machine, Sand Blasting Machine, etc. |
| Origin | India, West Europe, Japan, USA, Korea |
| Manufacturer Of |
ASME, DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE. B.S. : BS4504, BS3293, BS1560, BS10 AS 2129 : Table D, Table E, Table H ASME : B16.5, B16.47 Series A & B, MSS SP44, B16.36, B16.48, API605 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638. Other Standards : AWWA C207, EN1092-1, GOST12820, JIS B2220, KS B1503, SABS1123, NFE29203, UNI2276. |
| Uses & Applications | Bitumen Upgraders, Heavy Oil Refineries, Nuclear Power Plants, Petrochemical Industry, Acid Processing Plants. |
Material Grades of Slip On Flanges
| Material Grades | |
|---|---|
| Stainless Steel Slip-On Flanges | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4409. |
| Carbon Steel Slip-On Flanges | ASTM/ASME A/SA105, A/SA105N, A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, ASTM A350 LF2 / ASME SA350, High Yield ASTM A694 Grades F52, F56, F60, F65, F70, F80. |
| Alloy Steel Slip-On Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91. |
| Titanium Slip-On Flanges | ASTM B381 / ASME SB381, Titanium Grade 1, Grade 2, Grade 4, Grade 5, Grade 7, ASTM R50250, R50400, R50550, R50700, R52400, R53400, R56320, R56400. |
| Copper Slip-On Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910, C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000, C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640. |
| Copper Nickel Slip-On Flanges | ASTM / ASME SB61, SB62, SB151, SB152, Copper Nickel 90/10 (C70600), Cupro Nickel 70/30 (C71500), UNS C71640. |
| Inconel Slip-On Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 690, 718, 783, X-750. |
| Hastelloy Slip-On Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3. |
| Monel Slip-On Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS N04400), Monel K500 (UNS N05500). |
| Alloy 20 Slip-On Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3. |
| Aluminium Slip-On Flanges | 5052, 6061, 6063, 2017, 7075 and other aluminium grades. |
| Nickel Alloy Slip-On Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC. |
| Duplex Steel Slip-On Flanges | UNS S31803, S32205, ASTM A182 F51, F52, F53, F54, F55, F57, F59, F60, F61. |
| Super Duplex Slip-On Flanges | UNS S32750, S32760, ASTM A182 F51, F52, F53, F54, F55, F57, F59, F60, F61. |
| Incoloy Slip-On Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925. |
| 254 SMO Slip-On Flanges | ASTM A182 / ASME SA182, 254 SMO (6Mo), UNS S31254, DIN 1.4547. |
| Nimonic Slip-On Flanges | Nimonic 75, Nimonic 80A, Nimonic 90. |
| Brass Slip-On Flanges | 3602, 2604, H59, H62 and other brass grades. |
| Other Slip-On Flanges Material | Tin Bronze, Aluminium Bronze, Lead Bronze. |
Dimensions of Slip On Flanges
| ANSI/ASME/ASA B16.5 150lb/sq.in. Flanges | ||||||||||
| ø | D | b | g | m | J | h | k | Holes | l | Kg. |
| 1/2″ | 88,9 | 11,1 | 34,9 | 30,2 | 22,3 | 15,9 | 60,3 | 4 | 15,9 | 0,400 |
| 3/4″ | 98,4 | 12,7 | 42,9 | 38,1 | 27,7 | 15,9 | 69,8 | 4 | 15,9 | 0,700 |
| 1″ | 107,9 | 14,3 | 50,8 | 49,2 | 34,5 | 17,5 | 79,4 | 4 | 15,9 | 0,800 |
| 1 1/4″ | 117,5 | 15,9 | 63,5 | 58,8 | 43,2 | 20,6 | 88,9 | 4 | 15,9 | 1,100 |
| 1 1/2″ | 127,0 | 17,5 | 73,0 | 65,1 | 49,5 | 22,2 | 98,4 | 4 | 15,9 | 1,400 |
| 2″ | 152,4 | 19,0 | 92,1 | 77,8 | 62,0 | 25,4 | 120,6 | 4 | 19,0 | 2,200 |
| 2 1/2″ | 177,8 | 22,2 | 104,8 | 90,5 | 74,7 | 28,6 | 139,7 | 4 | 19,0 | 3,600 |
| 3″ | 190,5 | 23,8 | 127,0 | 107,9 | 90,7 | 30,2 | 152,4 | 4 | 19,0 | 4,100 |
| 3 1/2″ | 215,9 | 23,8 | 139,7 | 122,2 | 103,4 | 31,7 | 177,8 | 8 | 19,0 | 5,200 |
| 4″ | 228,6 | 23,8 | 157,2 | 134,9 | 116,1 | 33,3 | 190,5 | 8 | 19,0 | 5,600 |
| 5″ | 254,0 | 23,8 | 185,7 | 163,6 | 143,8 | 36,5 | 215,9 | 8 | 22,2 | 6,300 |
| 6″ | 279,4 | 25,4 | 215,9 | 192,1 | 170,7 | 39,7 | 241,3 | 8 | 22,2 | 7,500 |
| 8″ | 342,9 | 28,6 | 269,9 | 246,1 | 221,5 | 44,4 | 298,4 | 8 | 22,2 | 12,600 |
| 10″ | 406,4 | 30,2 | 323,8 | 304,8 | 276,3 | 49,2 | 361,9 | 12 | 25,4 | 18,500 |
| 12″ | 482,6 | 31,7 | 381,0 | 365,1 | 327,1 | 55,6 | 431,8 | 12 | 25,5 | 28,000 |
| 14″ | 533,4 | 34,9 | 412,7 | 400,0 | 359,1 | 57,1 | 476,2 | 12 | 28,6 | 36,000 |
| 16″ | 596,9 | 36,5 | 469,9 | 457,2 | 410,5 | 63,5 | 539,7 | 16 | 28,6 | 46,000 |
| 18″ | 635,0 | 39,7 | 533,4 | 504,8 | 461,8 | 68,3 | 577,8 | 16 | 31,7 | 50,000 |
| 20″ | 698,5 | 42,9 | 584,2 | 558,8 | 513,1 | 73,0 | 635,0 | 20 | 31,7 | 64,000 |
| 22″ | 749,3 | 46,0 | 641,2 | 609,6 | 564,4 | 79,4 | 692,1 | 20 | 34,9 | 72,000 |
| 24″ | 812,8 | 47,6 | 692,1 | 663,6 | 615,9 | 82,5 | 749,3 | 20 | 34,9 | 89,000 |
| ANSI/ASME/ASA B16.5 600lb/sq.in. Flanges | ||||||||||
| ø | D | b | g | m | J | h | k | Holes | l | Kg. |
| 1/2″ | 95,2 | 14,3 | 34,9 | 38,1 | 22,3 | 22,2 | 66,7 | 4 | 15,9 | 0,800 |
| 3/4″ | 117,5 | 15,9 | 42,9 | 47,6 | 27,7 | 25,4 | 82,5 | 4 | 19,0 | 1,400 |
| 1″ | 123,8 | 17,5 | 50,8 | 54,0 | 34,5 | 27,0 | 88,9 | 4 | 19,0 | 1,600 |
| 1 1/4″ | 133,3 | 20,6 | 63,5 | 63,5 | 43,2 | 28,6 | 98,4 | 4 | 19,0 | 2,100 |
| 1 1/2″ | 155,6 | 22,2 | 73,0 | 69,8 | 49,5 | 31,7 | 114,3 | 4 | 22,2 | 3,100 |
| 2″ | 165,1 | 25,4 | 92,1 | 84,1 | 62,0 | 36,5 | 127,0 | 8 | 19,0 | 3,700 |
| 2 1/2″ | 190,5 | 28,6 | 104,8 | 100,0 | 74,7 | 41,3 | 149,2 | 8 | 22,2 | 5,400 |
| 3″ | 209,5 | 31,7 | 127,0 | 117,5 | 90,7 | 46,0 | 168,3 | 8 | 22,2 | 7,300 |
| 3 1/2″ | 228,6 | 34,9 | 139,7 | 133,3 | 103,4 | 49,2 | 184,1 | 8 | 25,4 | 8,900 |
| 4″ | 273,0 | 38,1 | 157,2 | 152,4 | 116,1 | 54,0 | 215,9 | 8 | 25,4 | 11,800 |
| 5″ | 330,2 | 44,4 | 185,7 | 188,9 | 143,8 | 60,3 | 266,7 | 8 | 28,6 | 24,500 |
| 6″ | 355,6 | 47,6 | 215,9 | 222,2 | 170,7 | 66,7 | 292,1 | 12 | 28,6 | 29,500 |
| 8″ | 419,1 | 55,6 | 269,9 | 273,0 | 221,5 | 76,2 | 349,2 | 12 | 31,7 | 43,000 |
| 10″ | 508,0 | 63,5 | 323,8 | 342,8 | 276,3 | 85,7 | 431,8 | 16 | 34,9 | 70,000 |
| 12″ | 558,8 | 66,7 | 381,0 | 400,0 | 327,1 | 92,1 | 488,9 | 20 | 34,9 | 86,000 |
| 14″ | 603,2 | 69,8 | 412,7 | 431,8 | 359,1 | 93,7 | 527,0 | 20 | 38,1 | 100,000 |
| 16″ | 685,8 | 76,2 | 469,9 | 495,3 | 410,5 | 106,4 | 603,2 | 20 | 41,3 | 142,000 |
| 18″ | 742,9 | 82,5 | 533,4 | 546,1 | 461,8 | 117,5 | 654,0 | 20 | 44,4 | 175,000 |
| 20″ | 812,8 | 88,9 | 584,2 | 609,6 | 513,1 | 127,0 | 723,9 | 24 | 44,4 | 232,000 |
| 22″ | 869,9 | 95,2 | 641,2 | 666,7 | 564,4 | 133,3 | 777,9 | 24 | 47,6 | 292,000 |
| 24″ | 939,8 | 101,6 | 692,1 | 717,5 | 615,9 | 139,7 | 838,2 | 24 | 50,8 | 330,000 |
You need our support, to
have any projects?
ASME B16.5 Slip On Flange Weight Chart
| Rated Diameter | O.D. of Pipe | Flange Parameter | Neck Size | Size of R.F. | Bolts | Approx. Weight | |||||||
| DN | d1 | D | d5 | b | k | h | d3 | r | d4 | f | No. of holes | d2 | KG |
| 10 | 17.2 | 90 | 17.7 | 14 | 60 | 20 | 30 | 4 | 40 | 2 | 4 | 14 | 0.56 |
| 15 | 21.3 | 95 | 22 | 14 | 65 | 20 | 35 | 4 | 45 | 2 | 4 | 14 | 0.62 |
| 20 | 26.9 | 105 | 27.6 | 16 | 75 | 24 | 45 | 4 | 58 | 2 | 4 | 14 | 0.91 |
| 25 | 33.7 | 115 | 34.4 | 16 | 85 | 24 | 52 | 5 | 68 | 2 | 4 | 14 | 1.09 |
| 32 | 42.4 | 140 | 43.1 | 16 | 100 | 26 | 60 | 5 | 78 | 2 | 4 | 18 | 1.58 |
| 40 | 48.3 | 150 | 49 | 16 | 110 | 26 | 70 | 5 | 88 | 3 | 4 | 18 | 1.76 |
| 50 | 60.3 | 165 | 61.1 | 18 | 125 | 28 | 85 | 5 | 102 | 3 | 4 | 18 | 2.39 |
| 65 | 76.1 | 185 | 77.1 | 18 | 145 | 32 | 105 | 5 | 122 | 3 | 4 | 18 | 3.1 |
| 80 | 88.9 | 200 | 90.3 | 20 | 160 | 34 | 118 | 5 | 138 | 3 | 8 | 18 | 3.77 |
| 100 | 114.3 | 220 | 115.9 | 20 | 180 | 38 | 140 | 5 | 158 | 3 | 8 | 18 | 4.29 |
| 125 | 139.7 | 250 | 141.6 | 22 | 210 | 40 | 168 | 5 | 188 | 3 | 8 | 18 | 5.86 |
| 150 | 168.3 | 285 | 170.5 | 22 | 240 | 44 | 196 | 5 | 212 | 3 | 8 | 22 | 7.22 |
| 175 | 193.7 | 315 | 196.1 | 24 | 270 | 44 | 224 | 6 | 242 | 3 | 8 | 22 | 9.18 |
| 200 | 219.4 | 340 | 222 | 24 | 295 | 44 | 247 | 6 | 268 | 3 | 8 | 22 | 9.95 |
| 250 | 273 | 395 | 276 | 26 | 350 | 46 | 300 | 6 | 320 | 3 | 12 | 22 | 12.69 |
| 300 | 323.9 | 445 | 327 | 26 | 400 | 46 | 352 | 6 | 370 | 4 | 12 | 22 | 14.4 |
| 350 | 355.6 | 505 | 359 | 26 | 460 | 53 | 398 | 10 | 430 | 4 | 16 | 22 | 22.36 |
| 400 | 406.4 | 565 | 410 | 26 | 515 | 57 | 448 | 10 | 482 | 4 | 16 | 26 | 26.85 |
| 450 | 457 | 615 | 461 | 28 | 565 | 62 | 502 | 10 | 532 | 4 | 20 | 26 | 32.53 |
| 500 | 508 | 670 | 512 | 28 | 620 | 67 | 552 | 10 | 585 | 4 | 20 | 26 | 37.84 |
| 600 | 610 | 780 | 614 | 28 | 725 | 75 | 658 | 10 | 685 | 5 | 20 | 30 | 49.32 |
| 700 | 711 | 895 | 716 | 30 | 840 | 77 | 760 | 10 | 800 | 5 | 24 | 30 | 63.86 |
| 800 | 813 | 1015 | 818 | 32 | 950 | 84 | 864 | 10 | 905 | 5 | 24 | 33 | 85.19 |
| 900 | 914 | 1115 | 920 | 34 | 1050 | 88 | 969 | 10 | 1005 | 5 | 28 | 33 | 101.4 |
| 1000 | 1016 | 1230 | 1022 | 34 | 1160 | 92 | 1071 | 10 | 1110 | 5 | 28 | 36 | 119.7 |
Ready Stock of Slip On Flanges
Carbon Steel SORF Flanges
Copper Nickel Slip On Pipe Flanges
High Quality Slip On Flange
Slip On Plate Flanges
Stainless Steel Slip On Flanges
DIN-PN16 Steel Slip-On Flanges
SS Slip On Flange
Duplex Steel Raised Face Slip On Flanges
ANSI B16.5 Class 150 Slip-On Flanges
Super Duplex Steel Slip On Flange
ASTM A182 Stainless Steel SORF Flange
Hastelloy Flat Faced Slip-On Flanges
Super Duplex 2507 SORF Flanges
Class 600 Slip On Flange
Alloy 20 Slip On Plate Flanges
ANSI B16.5 Slip On Flange
Hastelloy Slip On Raised Face Flanges
Titanium Slip-on Flanges
Class 600 SORF Flange Stockist
254 SMO Slip On Flange Supplier
Slip On Plate Flanges
Duplex Steel 2205 Slip On Flange
ANSI B16.5 class 150 SORF Flange
High Nickel Alloy SORF Flanges
Slip On Flanges Application Industries
Refineries
90%
Oil and Gas Industry
96%
Power Generation
80%
Pharmaceutical Equipment
85%
Pulp & Paper Industry
88%
Our Products
- High‑Nickel Alloy Fasteners
- Aluminium Scrap
- Inconel Fasteners
- Monel Fasteners
- Nickel Fasteners
- Titanium Fasteners
- Tube Plugs
- Carbon Steel SA179 Tube Plug
- Inconel Tube Plug
- Titanium Tube Plug
- Duplex Tube Plug
- Header Plug
- Carbon Steel Header Plug
- Low Carbon Steel Header Plug
- Stainless Steel Header Plug
- Duplex Header Plug
- Plug Gasket
- Carbon Steel Soft Iron Plug Gasket
- Stainless Steel Plug Gasket
- Nickel Plug Gasket
- Inconel Plug Gasket
- Round Bar
- Duplex Round Bars
- Super Duplex Round Bars
- Monel Round Bar
- Hastelloy Round Bar
- Spiral Wound Gasket
- Stainless Steel Spiral Wound Gasket
- Inconel Spiral Wound Gasket
- Duplex Spiral Wound Gasket
- Monel Spiral Wound Gasket
Brochure
- Unifit Tapered Tube Plug
- Unifit Tube Fittings
- ASTM A193 Grade B7 Data Sheet
- Unifit Buttweld Fittings
- Unifit Flanges
- Unifit Forged Fittings
- Unifit Header Plug & Tube Plug
- Unifit - RTJ Gasket - R Type
- Unifit - RTJ Gasket - RX Type
- Unifit - RTJ Gasket - BX Type
- Unifit - Soft Iron Plug Gaskets
- Unifit - Plug Gaskets
- Unifit Metalloys Inc - Round Bar
- Unifit Metalloys Inc - Sheet
- Unifit Metalloys Inc - Fasteners
- Unifit Metalloys Inc - Pipe